Summary of Drill Results at Mother Lode | ||||||||
Hole Location | Hole ID | From (m) | To (m) | Interval (m) | Gold (g/t) | Silver (g/t) | Comments | |
Released Jan 10, 2018 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t and 1 g/t cutoff | RC Hole @ Mother Lode South End of Deposit | ML17-016 | 140.21 | 143.26 | 3.05 | 1.04 | 0.26 | |
AZ 090 dip-45 | 158.50 | 167.64 | 9.14 | 1.11 | 0.20 | |||
inc | 161.54 | 166.12 | 4.58 | 1.62 | 0.22 | |||
175.26 | 184.40 | 9.14 | 0.98 | 1.96 | Deep In-pit Zone | |||
inc | 179.83 | 182.88 | 3.05 | 2.36 | 3.31 | Deep In-pit Zone | ||
216.41 | 228.60 | 12.19 | 0.96 | 1.61 | Deep In-pit Zone | |||
inc | 217.93 | 219.46 | 1.52 | 5.52 | 4.09 | Deep In-pit Zone | ||
RC Hole @ Mother Lode Northwest Extension |
ML17-017 | 268.22 | 272.80 | 4.58 | 0.68 | 0.59 | Northwest Extension | |
AZ 090 dip-70 | 291.08 | 326.14 | 35.06 | 1.97 | 2.09 | Northwest Extension | ||
inc | 292.61 | 324.61 | 32.00 | 2.10 | 2.17 | Northwest Extension | ||
347.47 | 352.04 | 4.57 | 0.55 | 0.33 | Northwest Extension | |||
RC Hole @ Mother Lode Drilled West of ML17-006 |
ML17-018 | 105.16 | 187.45 | 82.29 | 1.11 | n/a | ||
inc | 105.16 | 132.59 | 27.43 | 1.57 | 1.32 | |||
inc | 156.97 | 172.21 | 15.24 | 1.72 | 2.75 | |||
202.69 | 208.79 | 6.10 | 0.60 | n/a | ||||
220.98 | 227.08 | 6.10 | 0.62 | 0.51 | ||||
AZ 090 dip-65 | 236.22 | 245.36 | 9.14 | 1.09 | 1.65 | Deep Main Zone | ||
inc | 240.79 | 245.36 | 4.57 | 1.41 | 2.61 | Deep Main Zone | ||
RC Hole @ Mother Lode Drilled West of ML17-004 |
ML17-019 | 92.96 | 109.73 | 16.77 | 0.47 | 0.57 | ||
AZ 090 dip-87 | 146.30 | 213.36 | 67.06 | 1.32 | 1.92 | |||
inc | 147.83 | 166.12 | 18.29 | 1.49 | 3.08 | |||
inc | 170.69 | 176.78 | 6.09 | 1.13 | 0.73 | |||
inc | 182.88 | 211.84 | 28.96 | 1.58 | 1.99 | |||
291.08 | 294.13 | 3.05 | 0.96 | 0.47 | ||||
336.80 | 345.95 | 9.15 | 0.86 | 1.36 | Deep Main Zone | |||
inc | 336.80 | 339.85 | 3.05 | 1.95 | 3.19 | Deep Main Zone | ||
RC Hole @ Mother Lode Drilled West of ML17-007 |
ML17-020 | 120.40 | 216.41 | 96.01 | 1.35 | 1.24 | 0.1 g/t cutoff | |
AZ 090 dip-65 | 121.92 | 143.26 | 21.34 | 0.49 | 0.60 | Drilled west of ML17-007 | ||
147.83 | 167.64 | 19.81 | 1.82 | 1.23 | ||||
172.21 | 210.31 | 38.10 | 2.12 | 1.98 | ||||
inc | 173.74 | 196.60 | 22.86 | 3.08 | 2.21 | |||
259.08 | 265.18 | 6.10 | 0.49 | 2.22 | Deep Main Zone | |||
271.27 | 298.70 | 27.43 | 1.31 | 3.90 | Deep Main Zone | |||
inc | 275.84 | 283.46 | 7.62 | 3.46 | 9.98 | Deep Main Zone | ||
RC Hole @ Mother Lode Drilled West of ML17-005 |
ML17-021 | 100.58 | 126.49 | 25.91 | 0.44 | 0.49 | ||
AZ 090 dip-45 | 147.83 | 178.31 | 30.48 | 2.54 | 1.92 | |||
227.08 | 262.13 | 35.05 | 1.95 | 2.48 | ||||
inc | 227.08 | 246.89 | 19.81 | 2.28 | 2.05 | |||
inc | 251.46 | 262.13 | 10.67 | 2.07 | 4.20 | |||
RC Hole @ Mother Lode Drilled West of ML17-009 |
ML17-022 | 102.11 | 124.97 | 22.86 | 0.41 | 0.37 | ||
AZ 090 dip-85 | 129.54 | 153.92 | 24.38 | 0.74 | 0.80 | |||
inc | 131.06 | 135.64 | 4.58 | 1.34 | 1.71 | |||
170.69 | 216.41 | 45.72 | 1.33 | 1.25 | ||||
inc | 172.21 | 207.26 | 35.05 | 1.57 | 1.29 | |||
329.18 | 338.33 | 9.15 | 0.40 | 0.30 | Deep Main Zone | |||
RC Hole @ Mother Lode In-Pit | ML17-023 | 64.01 | 67.06 | 3.05 | 0.81 | 1.96 | ||
AZ 360 dip-90 | 79.25 | 99.06 | 19.81 | 0.73 | 1.23 | |||
inc | 89.92 | 94.49 | 4.57 | 1.21 | 1.93 | |||
103.63 | 111.25 | 7.62 | 2.69 | 2.60 | Deep In-pit Zone | |||
RC Hole @ Mother Lode In-Pit | ML17-024 | 0.00 | 15.24 | 15.24 | 2.76 | 1.42 | ||
AZ 360 dip-90 | 19.81 | 41.15 | 21.34 | 0.58 | 0.30 | |||
79.25 | 112.78 | 33.53 | 0.94 | 1.37 | ||||
82.30 | 100.58 | 18.28 | 1.40 | 1.79 | ||||
117.35 | 129.54 | 12.19 | 0.56 | 0.38 | Deep In-pit Zone | |||
140.21 | 149.35 | 9.14 | 0.55 | 2.72 | Deep In-pit Zone | |||
RC Hole @ Mother Lode In-Pit | ML17-025 | 0.00 | 50.29 | 50.29 | 1.74 | 1.17 | ||
inc | 0.00 | 19.81 | 19.81 | 2.26 | 1.60 | |||
inc | 24.38 | 42.67 | 18.29 | 1.99 | 1.13 | |||
AZ 360 dip-90 | 86.87 | 108.20 | 21.33 | 1.59 | 2.11 | |||
inc | 86.87 | 103.63 | 16.76 | 1.90 | 2.53 | |||
138.68 | 141.73 | 3.05 | 2.90 | 0.85 | Deep In-pit Zone | |||
150.88 | 164.59 | 13.71 | 1.41 | 4.39 | Deep In-pit Zone | |||
inc | 152.40 | 158.50 | 6.10 | 2.09 | 6.61 | Deep In-pit Zone |
Hole Location | Hole ID | From (m) | To (m) | Interval (m) | Gold (g/t) |
Silver (g/t) | Comments | |
Released Jan 18, 2018 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t and 1 g/t cutoff | RC Hole @ Mother Lode Drilled West of ML17-014 | ML-17-026 | 126.49 | 172.21 | 45.72 | 1.33 | 1.73 | |
inc | 126.49 | 129.54 | 3.05 | 1.47 | 2.01 | >1g/t cut | ||
inc | 144.78 | 169.16 | 24.38 | 1.72 | 2.03 | >1g/t cut | ||
AZ 090 dip-65 | 178.31 | 185.93 | 7.62 | 0.57 | 2.44 | |||
242.32 | 266.70 | 24.38 | 0.93 | 2.28 | Deep In-pit Zone | |||
inc | 249.94 | 256.03 | 6.09 | 1.75 | 2.86 | >1g/t cut | ||
RC Hole @ Mother Lode Drilled West of ML17-008 | ML-17-027 | 124.97 | 156.97 | 32.00 | 0.49 | 1.02 | ||
inc | 150.88 | 153.92 | 3.05 | 1.03 | 1.62 | >1g/t cut | ||
AZ 090 dip-65 | 172.21 | 176.78 | 4.57 | 0.78 | 0.94 | |||
181.36 | 213.36 | 32.00 | 0.63 | 1.28 | ||||
inc | 188.98 | 192.02 | 3.05 | 1.33 | 3.52 | >1g/t cut | ||
233.17 | 251.46 | 18.29 | 0.44 | 0.88 | Deep In-pit Zone | |||
RC Hole @ Mother Lode Drilled East of ML17-016 | ML-17-028 | 73.15 | 124.97 | 51.82 | 1.86 | 0.88 | ||
inc | 83.82 | 103.63 | 19.81 | 3.43 | 1.28 | >1g/t cut | ||
inc | 115.82 | 121.92 | 6.10 | 2.37 | 2.60 | >1g/t cut | ||
AZ 090 dip-65 | 167.64 | 172.21 | 4.57 | 0.74 | 2.10 | Deep In-pit Zone | ||
RC Hole @ Mother Lode Drilled West of ML17-010 | ML-17-029 | 103.63 | 112.78 | 9.15 | 0.43 | 0.19 | ||
AZ 090 dip-85 | 117.35 | 123.44 | 6.09 | 0.73 | 1.59 | |||
161.54 | 179.83 | 18.29 | 1.84 | 1.46 | ||||
193.55 | 196.60 | 3.05 | 0.46 | 1.56 | ||||
204.22 | 240.79 | 36.57 | 1.85 | 3.15 | ||||
inc | 211.84 | 237.74 | 25.90 | 2.37 | 3.75 | >1g/t cut | ||
277.37 | 286.51 | 9.14 | 1.17 | 2.41 | ||||
inc | 278.89 | 284.99 | 6.10 | 1.56 | 2.39 | >1g/t cut | ||
320.04 | 338.33 | 18.29 | 0.90 | 3.47 | ||||
inc | 321.56 | 326.14 | 4.57 | 2.55 | 6.59 | >1g/t cut | ||
RC Hole @ Mother Lode Drilled West of ML17-023 | ML-17-030 | 59.44 | 62.48 | 3.04 | 0.93 | 0.58 | ||
AZ 090 dip-65 | 100.58 | 105.16 | 4.57 | 0.67 | 0.12 | |||
112.78 | 117.35 | 4.57 | 0.89 | 0.06 | ||||
144.78 | 155.45 | 10.67 | 0.97 | 0.99 | ||||
161.54 | 164.59 | 3.05 | 0.35 | 1.55 | ||||
169.16 | 172.21 | 3.05 | 0.37 | 0.43 | ||||
176.78 | 179.83 | 3.05 | 0.35 | 0.53 | ||||
185.93 | 198.12 | 12.19 | 0.80 | 0.55 | Deep In-pit Zone | |||
inc | 190.50 | 193.55 | 3.05 | 1.58 | 1.01 | >1g/t cut | ||
RC Hole @ Mother Lode | ML-17-031 | 313.94 | 347.47 | 33.53 | 1.60 | 3.13 | NW of hole ML17-003 | |
AZ 090 dip-70 | 313.94 | 332.23 | 18.29 | 2.47 | 4.12 | |||
RC Hole @ Mother Lode Drilled West of ML17-016 | ML-17-032 | 137.16 | 172.21 | 35.05 | 0.93 | 1.22 | ||
inc | 161.54 | 172.21 | 10.67 | 1.78 | 1.24 | >1g/t cut | ||
AZ 360 dip-90 | 181.36 | 195.07 | 13.71 | 1.24 | 1.36 | |||
inc | 187.45 | 193.55 | 6.10 | 2.02 | 2.58 | >1g/t cut | ||
199.64 | 213.36 | 13.72 | 0.86 | 2.45 | Deep In-pit Zone | |||
231.65 | 243.84 | 12.19 | 0.81 | 0.63 | Deep In-pit Zone | |||
RC Hole @ Mother Lode | ML-17-033 | 294.13 | 306.32 | 12.19 | 2.31 | 2.05 | North of hole ML17-003 | |
AZ 090 dip-70 | 294.13 | 301.75 | 7.62 | 3.39 | 2.58 |
Hole Location | Hole ID | From (m) | To (m) | Interval (m) | Gold (g/t) |
Silver (g/t) | Comments | |
Released Feb 1, 2018 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t and 1 g/t cutoff |
RC Hole SW of Pit, New Upper Ox Zone |
ML17-034 | 100.58 | 123.44 | 22.86 | 1.18 | 3.27 | |
134.11 | 150.88 | 16.77 | 0.50 | 7.28 | ||||
AZ 360 dip-90 | 254.51 | 257.56 | 3.05 | 0.39 | 0.44 | |||
RC Hole @ Mother Lode West of ML17-027 New Upper Ox Zone |
ML17-036 | 143.26 | 152.40 | 9.14 | 0.76 | n/a | ||
inc | 147.83 | 150.88 | 3.05 | 1.45 | 2.31 | >1 g/t | ||
AZ 090 dip-85 | 158.50 | 164.59 | 6.09 | 0.97 | 1.69 | New Upper Ox Zone | ||
230.12 | 236.22 | 6.10 | 0.60 | 2.50 | ||||
257.56 | 265.18 | 7.62 | 0.71 | 0.48 | ||||
280.42 | 324.61 | 44.19 | 1.33 | 1.40 | New Deep In-Pit Zone | |||
inc | 280.42 | 284.99 | 4.57 | 2.16 | 1.10 | >1 g/t | ||
inc | 295.66 | 313.94 | 18.28 | 2.10 | 2.50 | >1 g/t | ||
RC Hole @ Mother Lode East of ML17-13 | ML17-037 | 188.98 | 211.84 | 22.86 | 0.77 | 0.52 | ||
inc | 196.60 | 199.64 | 3.05 | 1.03 | 0.51 | >1g/t cut | ||
inc | 205.74 | 208.79 | 3.05 | 1.21 | 0.56 | >1g/t cut | ||
AZ 090 dip-70 | 246.89 | 259.08 | 12.19 | 2.69 | 2.64 | New East Zone | ||
inc | 248.41 | 257.56 | 9.15 | 3.31 | 3.03 | >1g/t cut | ||
RC Hole @ Mother Lode West of ML17-018 | ML17-038 | 132.59 | 185.93 | 53.34 | 1.57 | 1.96 | ||
inc | 132.59 | 144.78 | 12.19 | 2.29 | 2.29 | >1g/t cut | ||
inc | 149.35 | 179.83 | 30.48 | 1.61 | 1.85 | >1g/t cut | ||
AZ 090 dip-85 | 281.94 | 304.80 | 22.86 | 0.49 | 0.37 | |||
309.37 | 321.56 | 12.19 | 0.87 | 3.29 | New Deep In-Pit Zone | |||
inc | 315.47 | 320.04 | 4.57 | 1.22 | 5.66 | >1g/t cut | ||
RC Hole West of ML17-021 New Upper Ox Zone |
ML17-039 | 100.58 | 105.16 | 4.57 | 0.46 | 0.15 | ||
AZ 090 dip-85 | 112.78 | 124.97 | 12.19 | 0.56 | 0.40 | New Upper Ox Zone | ||
182.88 | 252.98 | 70.10 | 1.45 | 1.98 | West Ext - Main Zone | |||
inc | 192.02 | 246.89 | 54.87 | 1.72 | 2.18 | >1g/t cut | ||
RC Hole @ Mother Lode West of ML17-020 New Upper Ox Zone |
ML17-040 | 106.68 | 109.73 | 3.05 | 0.36 | n/a | ||
AZ 090 dip-85 | 124.97 | 128.02 | 3.05 | 0.36 | n/a | New Upper Ox Zone | ||
140.21 | 152.40 | 12.19 | 0.49 | n/a | New Upper Ox Zone | |||
185.93 | 216.41 | 30.48 | 1.80 | n/a | West Ext – Main Zone | |||
inc | 185.93 | 213.36 | 27.43 | 1.91 | n/a | >1g/t cut | ||
RC Hole @ Mother Lode East of ML17-001 |
ML17-041 | 89.92 | 115.82 | 25.90 | 0.77 | 0.38 | ||
inc | 96.01 | 99.06 | 3.05 | 2.65 | 1.06 | >1g/t cut | ||
AZ 090 dip-65 | 150.88 | 166.12 | 15.24 | 0.89 | 1.99 | New East Zone | ||
inc | 150.88 | 160.02 | 9.14 | 1.28 | 2.63 | >1g/t cut | ||
RC Hole @ Mother Lode East of ML17-011 |
ML17-042 | 24.38 | 32.00 | 7.62 | 0.31 | 0.33 | ||
150.88 | 179.83 | 28.95 | 2.02 | 1.86 | New East Zone | |||
inc | 150.88 | 172.21 | 21.33 | 2.62 | 2.43 | >1g/t cut | ||
AZ 090 dip-70 | 239.27 | 245.36 | 6.09 | 0.43 | 5.46 | Lower Ox Zone |
Hole Location | Hole ID | From (m) |
To (m) |
Interval (m) | Gold (g/t) | Silver (g/t) |
Comments | |
Released Feb 22, 2018 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t and 1 g/t cutoff | RC Hole @ Mother Lode SW of pit | ML17-035 AZ 180 dip-85 | 80.77 | 85.34 | 4.57 | 1.55 | n/a | |
RC Hole @ Mother Lode West of ML17-027 | ML18-043 | 124.97 | 128.02 | 3.05 | 0.63 | n/a | New Upper Ox Zone | |
137.16 | 143.26 | 6.10 | 0.55 | n/a | New Upper Ox Zone | |||
220.98 | 248.41 | 27.43 | 1.81 | n/a | West ext. – Main Zone | |||
inc | 224.03 | 246.89 | 22.86 | 2.05 | n/a | >1 g/t | ||
AZ 085 dip-70 | 333.76 | 341.38 | 7.62 | 0.44 | n/a | |||
RC Hole @ Mother Lode West of ML17-022 | ML18-044 | 207.26 | 222.50 | 15.24 | 0.37 | n/a | New Upper Ox Zone | |
AZ 085 dip-85 | 230.12 | 251.46 | 21.34 | 0.92 | n/a | New Upper Ox Zone | ||
inc | 234.70 | 239.27 | 4.57 | 1.22 | n/a | >1 g/t | ||
inc | 243.84 | 249.94 | 6.10 | 1.14 | n/a | >1 g/t | ||
256.03 | 281.94 | 25.91 | 2.32 | n/a | West ext. – Main Zone | |||
inc | 259.08 | 280.42 | 21.34 | 2.69 | n/a | >1 g/t | ||
RC Hole @ Mother Lode West of ML17-039 | ML18-045 | 169.16 | 176.78 | 7.62 | 0.52 | n/a | New Upper Ox Zone | |
AZ 085 dip-80 | 184.40 | 187.45 | 3.05 | 0.46 | n/a | New Upper Ox Zone | ||
256.03 | 295.66 | 39.63 | 2.45 | n/a | West ext. – Main Zone | |||
inc | 256.03 | 289.56 | 33.53 | 2.84 | n/a | >1 g/t |
Hole Location | Hole ID | From (m) |
To (m) |
Interval (m) |
Gold (g/t) |
Silver (g/t) |
Comments | |
Released Mar. 1, 2018 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t and 1 g/t cutoff |
RC Hole @ Mother Lode West of ML17-027 Upper East Zone |
ML18-046 | 21.34 | 51.82 | 30.48 | 2.05 | n/a | |
inc | 35.05 | 47.24 | 12.19 | 4.45 | n/a | >1 g/t | ||
85.34 | 91.44 | 6.10 | 0.77 | n/a | ||||
AZ 083 dip-55 | 216.41 | 225.55 | 9.14 | 0.95 | n/a | Lower East Zone | ||
inc | 217.93 | 220.98 | 3.05 | 2.05 | n/a | >1 g/t | ||
West of ML17-022 Lower East Zone |
ML18-047 | 193.55 | 205.37 | 11.82 | 1.77 | n/a | ||
inc | 193.55 | 201.17 | 7.62 | 2.57 | n/a | >1 g/t | ||
216.41 | 220.98 | 4.57 | 0.32 | n/a | ||||
AZ 085 dip-60 | 256.03 | 266.70 | 10.67 | 0.42 | n/a |
Released Mar. 22, 2018 * Reported intercepts not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t & 1 g/t cutoff |
Hole Location | Hole ID | From (m) |
To (m) |
Interval (m) |
Gold (g/t) |
Silver (g/t) |
Comments |
RC Hole East of ML17-037 Upper East Zone |
ML17-048 | 51.82 | 54.86 | 3.05 | 0.41 | n/a | ||
210.31 | 214.88 | 4.57 | 3.61 | n/a | East H-G Zone | |||
AZ 085 dip-65 | 320.04 | 341.38 | 21.34 | 0.77 | n/a | New Far-East Zone | ||
inc | 332.23 | 339.85 | 7.62 | 1.20 | n/a | >1 g/t | ||
RC Hole East of ML17-010 East H-G Zone |
ML17-049 | 230.12 | 237.74 | 7.62 | 21.77 | n/a | ||
248.41 | 252.98 | 4.57 | 0.27 | n/a | ||||
AZ 085 dip-70 | 277.37 | 280.42 | 3.05 | 1.20 | n/a |
Released Apr. 5, 2018 * Reported intercepts not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t & 1 g/t cutoff |
Hole Location | Hole ID | From (m) |
To (m) |
Interval (m) | Gold (g/t) |
Silver (g/t) | Comments |
RC Hole West of ML17-013 | ML18-050 | 345.95 | 367.28 | 21.33 | 2.00 | n/a | Main ML Zone | |
AZ 085 dip-65 | ||||||||
RC Hole West of ML17-017 | ML18-051 | 356.62 | 385.57 | 28.95 | 1.02 | n/a | East H-G Zone | |
inc | 356.62 | 371.86 | 15.24 | 1.56 | n/a | 1 g/t cut | ||
AZ 085 dip-70 | 400.81 | 416.05 | 15.24 | 0.45 | n/a | Lower OX Zone to the EOH | ||
RC Hole West of ML17-021 | ML18-052 | 132.59 | 155.45 | 22.86 | 0.67 | n/a | Upper LG Zone | |
inc | 149.35 | 153.92 | 4.57 | 1.30 | n/a | 1 g/t cut | ||
AZ 085 dip-75 | 230.12 | 283.46 | 53.34 | 1.90 | n/a | Main ML Zone | ||
inc | 230.12 | 277.37 | 47.25 | 2.09 | n/a | 1 g/t cut | ||
385.57 | 426.72 | 41.15 | 1.52 | n/a | Lower OX Zone to the EOH | |||
inc | 385.57 | 399.29 | 13.72 | 2.09 | n/a | 1 g/t cut | ||
inc | 408.43 | 414.53 | 6.10 | 2.74 | n/a | 1 g/t cut |
Hole Location |
Hole ID | From (m) | To (m) | Interval (m) | Gold (g/t) | Silver (g/t) | Comments | |
Released Apr. 25, 2018 * Reported intercepts not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t & 1 g/t cutoff & 0.1 g/t cutoff at Flatiron |
West side of ML Pit |
ML18-053 | 79.25 | 94.49 | 15.24 | 0.52 | n/a | Upper L-G OX Zone |
AZ 085 dip-85 | 114.30 | 126.49 | 12.19 | 0.38 | n/a | Upper L-G OX Zone | ||
134.11 | 141.73 | 7.62 | 0.40 | n/a | Upper L-G OX Zone | |||
146.30 | 149.35 | 3.05 | 0.67 | n/a | Upper L-G OX Zone | |||
155.45 | 163.07 | 7.62 | 0.44 | n/a | Upper L-G OX Zone | |||
173.74 | 176.78 | 3.05 | 1.17 | n/a | Upper L-G OX Zone | |||
214.88 | 248.41 | 33.53 | 2.20 | n/a | Upper & Lower Zone | |||
inc | 216.41 | 220.98 | 4.57 | 1.14 | n/a | 1 g/t cut | ||
inc | 227.08 | 246.89 | 19.81 | 3.29 | n/a | 1 g/t cut | ||
West of ML18-053 |
ML18-054 | 131.06 | 161.54 | 30.48 | 1.13 | n/a | Upper L-G OX Zone | |
inc | 135.64 | 141.73 | 6.09 | 1.50 | n/a | 1 g/t cut | ||
inc | 149.35 | 155.45 | 6.09 | 2.73 | n/a | 1 g/t cut | ||
AZ 085 dip-75 | 166.12 | 172.21 | 6.09 | 0.72 | n/a | Upper L-G OX Zone | ||
233.17 | 243.84 | 10.67 | 0.40 | n/a | Upper L-G OX Zone | |||
262.13 | 288.04 | 25.91 | 1.50 | n/a | Upper & Lower Zone | |||
inc | 262.13 | 271.27 | 9.14 | 2.65 | n/a | 1 g/t cut | ||
inc | 283.46 | 288.04 | 4.58 | 1.49 | n/a | 1 g/t cut | ||
West of ML18-054 |
ML18-055 | 188.98 | 214.88 | 25.90 | 0.94 | n/a | Upper LG OX Zone | |
inc | 195.07 | 201.17 | 6.10 | 1.30 | n/a | 1 g/t cut | ||
inc | 207.26 | 210.31 | 3.05 | 1.87 | n/a | 1 g/t cut | ||
AZ 085 dip-75 | 303.28 | 306.32 | 3.05 | 0.41 | n/a | Upper L-G OX Zone | ||
310.90 | 315.47 | 4.57 | 0.75 | n/a | Upper L-G OX Zone | |||
326.14 | 338.33 | 12.19 | 1.27 | n/a | Upper Main Zone (OX) | |||
inc | 327.66 | 335.28 | 7.62 | 1.72 | n/a | 1 g/t cut | ||
342.90 | 353.57 | 10.67 | 0.34 | n/a | L-G OX Zone | |||
361.19 | 367.28 | 6.09 | 1.18 | n/a | Lower Main Zone | |||
Flatiron, below hole ML18-057 |
ML18-056 | 184.40 | 204.22 | 19.82 | 0.43 | n/a | ||
inc | 184.40 | 185.93 | 1.52 | 3.73 | n/a | 1 g/t cut | ||
AZ 145 dip-75 | 213.36 | 230.12 | 16.76 | 0.24 | n/a | |||
Flatiron, drilled at base of Jasperoid |
ML18-057 | 213.36 | 230.12 | 16.76 | 0.24 | n/a | ||
AZ 145 dip-50 | 143.26 | 144.78 | 1.52 | 1.83 | n/a | 1 g/t cut |
Hole Location |
Hole ID | From (m) | To (m) | Interval (m) | Gold (g/t) | Silver (g/t) | Comments | |
Released May 24, 2018 * Reported intercepts not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t & 1 g/t cutoff & 0.1 g/t cutoff at Flatiron & Northeast |
AZ 140 Dip-70 | ML18-058 | 297.18 | 304.80 | 7.62 | 0.74 | 0.27 | OX on structure |
inc | 297.18 | 300.23 | 3.05 | 1.51 | 0.43 | 1 g/t cut | ||
Flatiron, West side of ML Pit | ML18-059 | 181.36 | 185.93 | 4.57 | 0.50 | n/a | Upper L-G OX Zone | |
AZ 085 dip-70 | 246.89 | 277.37 | 30.48 | 0.70 | n/a | Upper Zone | ||
inc | 256.03 | 259.08 | 3.05 | 1.16 | n/a | 1 g/t cut | ||
281.94 | 304.80 | 22.86 | 1.48 | n/a | Lower OX Zone | |||
inc | 281.94 | 300.23 | 18.29 | 1.73 | n/a | 1 g/t cut | ||
324.61 | 330.71 | 6.10 | 0.81 | n/a | Lower OX to end of hole | |||
West of ML18-053 | ML18-060 | 294.13 | 312.42 | 18.29 | 0.95 | n/a | Upper Zone | |
AZ 085 dip-80 | 318.52 | 321.56 | 3.05 | 0.48 | n/a | |||
345.95 | 370.33 | 24.38 | 3.10 | n/a | Lower Zone | |||
inc | 347.47 | 368.81 | 21.34 | 3.47 | n/a | 1 g/t cut | ||
West of ML18-054 | ML18-061 | 283.46 | 286.51 | 3.05 | 0.32 | n/a | Upper LG OX Zone | |
AZ 085 dip-70 | 291.08 | 303.28 | 12.20 | 0.54 | n/a | Upper OX | ||
309.37 | 321.56 | 12.19 | 1.13 | n/a | Lower OX to the end of the hole | |||
inc | 309.37 | 315.47 | 6.10 | 1.83 | n/a | 1 g/t cut | ||
Northeast, North of ML18-049 | ML18-062 | 62.48 | 67.06 | 4.57 | 0.14 | n/a | Upper LG OX Zone | |
AZ 070 dip-65 | 239.27 | 242.32 | 3.05 | 0.30 | n/a | |||
291.08 | 323.09 | 32.01 | 0.16 | n/a | ||||
327.66 | 339.85 | 12.19 | 0.37 | n/a | Lower OX Zone | |||
Northeast, North of ML18-062 | ML18-063 | 257.56 | 262.13 | 4.57 | 0.40 | n/a | Upper LG OX Zone | |
AZ 085 dip-70 | 271.27 | 289.56 | 18.29 | 0.29 | n/a | |||
300.23 | 303.28 | 3.05 | 0.30 | n/a | ||||
338.33 | 347.47 | 9.14 | 0.26 | n/a | Lower OX Zone |
Hole Location |
Hole ID | From (m) | To (m) | Interval (m) | Gold (g/t) | Silver (g/t) | Comments | |
Released June 13, 2018 * Reported intercepts not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t & 1 g/t |
Northeast Zone, East of ML17-033 |
ML18-064 | 294.13 | 315.47 | 21.34 | 0.97 | n/a | Main Zone |
inc | 294.13 | 304.80 | 10.67 | 1.42 | n/a | 1 g/t cut | ||
320.04 | 323.09 | 3.05 | 0.43 | n/a | Lower OX Zone | |||
367.28 | 370.33 | 3.05 | 0.74 | n/a | Lower OX Zone | |||
AZ 085 dip-65 | 373.38 | 377.95 | 4.57 | 0.30 | n/a | Lower OX Zone | ||
East of ML17-042 |
ML18-065 | 33.53 | 36.58 | 3.05 | 0.59 | n/a | Upper OX Zone | |
AZ 085 dip-50 | ||||||||
In-Pit Zone, South of ML18-046 |
ML18-066 | 0.00 | 15.24 | 15.24 | 1.56 | n/a | Upper OX Zone | |
inc | 0.00 | 9.14 | 9.14 | 2.24 | n/a | 1 g/t cut | ||
68.58 | 79.25 | 10.67 | 0.92 | n/a | Main Zone | |||
inc | 76.20 | 79.25 | 3.05 | 1.30 | n/a | 1 g/t cut | ||
105.16 | 108.20 | 3.05 | 0.73 | n/a | Lower OX | |||
AZ 085 dip-50 | 149.35 | 155.45 | 6.10 | 0.61 | n/a | Lower OX | ||
West Zone, West of ML18-045 |
ML18-067 | 201.17 | 227.08 | 25.91 | 0.68 | n/a | Upper OX Zone | |
inc | 222.50 | 225.55 | 3.05 | 1.18 | n/a | 1 g/t cut | ||
233.17 | 263.65 | 30.48 | 0.67 | n/a | New Zone | |||
inc | 257.56 | 262.13 | 4.57 | 1.15 | n/a | 1 g/t cut | ||
AZ 085 dip-70 | 297.18 | 316.99 | 19.81 | 3.76 | n/a | Main Zone | ||
inc | 298.70 | 316.99 | 18.29 | 4.02 | n/a | 1 g/t cut |
Hole Location |
Hole ID | From (m) | To (m) | Interval (m) | Gold (g/t) | Silver (g/t) | Comments | |
Released July 12, 2018 * Reported intercepts not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t & 1 g/t |
East of ML17-033 |
ML18-068 | 233.17 | 342.90 | 109.73 | 1.40 | n/a | Main Zone |
inc | 233.17 | 288.04 | 54.87 | 1.86 | n/a | 1 g/t cut | ||
inc | 298.70 | 320.04 | 21.34 | 1.26 | n/a | 1 g/t cut | ||
AZ 085 dip-70 | 329.18 | 338.33 | 9.15 | 1.33 | n/a | 1 g/t cut | ||
North of ML17-061 | ML18-069 | 292.61 | 306.32 | 13.71 | 0.94 | n/a | Upper OX Zone | |
AZ 085 dip-65 | 294.13 | 303.28 | 9.15 | 1.22 | n/a | |||
336.80 | 339.85 | 3.05 | 1.94 | n/a | ||||
South of ML18-054 | ML18-070 | 339.85 | 342.90 | 3.05 | 0.95 | n/a | Upper OX Zone | |
AZ 085 dip-60 | 353.57 | 359.66 | 6.09 | 2.54 | n/a | |||
inc | 353.57 | 358.14 | 4.57 | 3.28 | n/a | 1 g/t cut |
Hole Location |
Hole ID | From (m) | To (m) | Interval (m) | Gold (g/t) | Silver (g/t) | Comments | |
Released Sept 5, 2018 * Reported intercepts not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t & 1 g/t |
SW of ML18-070 |
ML18-071 | 240.79 | 243.84 | 3.05 | 0.52 | 0.69 | South extension |
AZ 085 dip-50 | ||||||||
West of ML18-060 |
ML18-072 | 362.71 | 368.81 | 6.10 | 0.36 | 0.63 | ||
AZ 080 dip-70 | 402.34 | 416.05 | 13.71 | 1.80 | 4.33 | Lower OX Zone | ||
West of ML18-069 |
ML18-073 | 321.56 | 370.33 | 48.77 | 1.19 | 1.22 | ||
inc | 338.33 | 361.19 | 22.86 | 1.74 | 1.62 | 1 g/t cut | ||
AZ 080 dip-60 | ||||||||
West of ML17-067 |
ML18-074 | 298.70 | 320.04 | 21.34 | 1.44 | 0.87 | ||
inc | 300.23 | 315.47 | 15.24 | 1.74 | 0.95 | 1 g/t cut | ||
AZ 080 dip-87 | 352.04 | 391.67 | 39.63 | 1.67 | 6.28 | |||
inc | 364.24 | 390.14 | 25.90 | 2.34 | 9.37 | 1 g/t cut | ||
West of ML18-072 |
ML18-075 | 463.30 | 469.39 | 6.09 | 1.00 | 0.57 | ||
inc | 463.30 | 466.34 | 3.05 | 1.40 | 0.86 | 1 g/t cut | ||
AZ 080 dip-85 | ||||||||
West of ML17-073 |
ML18-076 | 423.67 | 432.82 | 9.15 | 1.39 | 1.32 | ||
AZ 075 dip-80 | ||||||||
West of ML18-068 |
ML18-077 | 342.90 | 402.34 | 59.44 | 2.36 | 2.36 | ||
inc | 344.42 | 394.72 | 50.30 | 2.67 | 2.59 | 1 g/t cut | ||
AZ 075 dip-85 | ||||||||
West of ML18-073 |
ML18-078 | 371.86 | 390.14 | 18.28 | 1.49 | 1.82 | ||
inc | 373.38 | 385.57 | 12.19 | 1.97 | 2.34 | 1 g/t cut | ||
AZ 075 dip-85 |
Hole Location |
Hole ID | From (m) | To (m) | Interval (m) | Gold (g/t) | Silver (g/t) | Comments | |
Released Oct 2, 2018 * Reported intercepts not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t & 1 g/t |
West of ML18-050 |
ML18-079 | 304.80 | 324.61 | 19.81 | 3.52 | n/a | north Feeder Zone |
AZ 075 dip-65 | ||||||||
East of ML18-078 |
ML18-080 | 153.92 | 167.64 | 13.72 | 1.45 | n/a | ||
inc | 155.45 | 166.12 | 10.67 | 1.73 | n/a | 1 g/t cut | ||
AZ 080 dip-65 | 199.64 | 207.26 | 7.62 | 0.51 | n/a | |||
214.88 | 217.93 | 3.05 | 0.46 | n/a | ||||
239.27 | 368.81 | 129.54 | 1.12 | n/a | 0.1 g/t cut | |||
239.27 | 248.41 | 9.14 | 1.13 | n/a | ||||
inc | 239.27 | 243.84 | 4.57 | 1.52 | n/a | 1 g/t cut | ||
254.51 | 301.75 | 47.24 | 1.53 | n/a | ||||
inc | 239.27 | 243.84 | 4.57 | 1.52 | n/a | 1 g/t cut | ||
inc | 271.27 | 300.23 | 28.96 | 1.92 | n/a | 1 g/t cut | ||
306.32 | 361.19 | 54.87 | 1.06 | n/a | New Deep OX | |||
inc | 309.37 | 313.94 | 4.57 | 1.74 | n/a | 1 g/t cut | ||
inc | 327.66 | 345.95 | 18.29 | 1.73 | n/a | 1 g/t cut | ||
inc | 350.52 | 353.57 | 3.05 | 1.87 | n/a | 1 g/t cut | ||
West of ML18-001 | ML18-081 | 120.40 | 156.97 | 36.57 | 1.09 | n/a | ||
inc | 120.40 | 123.44 | 3.05 | 2.98 | n/a | 1 g/t cut | ||
inc | 135.64 | 153.92 | 18.28 | 1.35 | n/a | 1 g/t cut | ||
201.17 | 219.46 | 18.29 | 1.00 | n/a | New Deep OX | |||
inc | 208.79 | 213.36 | 4.57 | 2.20 | n/a | 1 g/t cut | ||
236.22 | 239.27 | 3.05 | 0.53 | n/a | ||||
AZ 090 dip-65 | 246.89 | 249.94 | 3.05 | 0.52 | n/a |
Hole Location |
Hole ID | From (m) | To (m) | Interval (m) | Gold (g/t) | Silver (g/t) | Comments | |
Released Oct 17, 2018 * Reported intercepts not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t & 1 g/t |
East of ML18-068 Western Zone |
ML18-082 | 211.84 | 220.98 | 9.14 | 0.33 | n/a | |
AZ 090dip-77 | 225.55 | 245.36 | 19.81 | 0.60 | n/a | |||
252.98 | 268.22 | 15.24 | 0.75 | n/a | ||||
275.84 | 298.70 | 22.86 | 2.53 | n/a | ||||
inc | 275.84 | 298.70 | 22.86 | 2.53 | n/a | 1 g/t cut | ||
West of ML17-031 north Feeder Zone |
ML18-083 | 295.66 | 301.75 | 6.09 | 0.32 | n/a | ||
AZ 085dip-70 | 323.09 | 388.62 | 65.53 | 1.53 | n/a | |||
inc | 323.09 | 326.14 | 3.05 | 1.84 | n/a | 1 g/t cut | ||
inc | 330.71 | 333.76 | 3.05 | 2.31 | n/a | 1 g/t cut | ||
inc | 338.33 | 377.95 | 39.62 | 1.93 | n/a | 1 g/t cut | ||
North of ML17-013 Western Zone |
ML18-084 | 233.17 | 239.27 | 6.10 | 0.79 | n/a | ||
inc | 234.70 | 237.74 | 3.05 | 1.02 | n/a | 1 g/t cut | ||
248.41 | 251.46 | 3.05 | 0.32 | n/a | ||||
271.27 | 326.14 | 54.87 | 1.60 | n/a | ||||
inc | 275.84 | 278.89 | 3.05 | 1.46 | n/a | 1 g/t cut | ||
inc | 284.99 | 324.61 | 39.62 | 1.89 | n/a | 1 g/t cut | ||
AZ 090dip-70 | 330.71 | 336.80 | 6.09 | 0.87 | n/a |
Hole Location |
Hole ID | From (m) | To (m) | Interval (m) | Gold (g/t) | Silver (g/t) | Comments | |
Released Jan 10, 2019 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t and 1 g/t cutoff | RC Hole @ Mother Lode Drilled West of ML18-083 | ML-18-085 | 335.28 | 359.66 | 24.38 | 0.20 | n/a | |
388.62 | 414.53 | 25.91 | 1.37 | n/a | ||||
inc | 390.14 | 405.38 | 15.24 | 1.59 | n/a | 1 g/t cut | ||
inc | 409.96 | 414.53 | 4.57 | 1.77 | n/a | 1 g/t cut | ||
AZ 080 dip-70 | 419.10 | 437.39 | 18.29 | 0.31 | n/a | |||
RC Hole @ Mother Lode Drilled North of ML18-093 | ML-18-092 | 374.90 | 384.05 | 9.15 | 0.51 | n/a | ||
AZ 085 dip-65 | 420.62 | 445.01 | 24.39 | 1.22 | n/a | |||
inc | 422.15 | 426.72 | 4.57 | 1.58 | n/a | 1 g/t cut | ||
inc | 429.77 | 437.39 | 7.62 | 1.46 | n/a | 1 g/t cut | ||
inc | 441.96 | 445.01 | 3.05 | 2.44 | n/a | 1 g/t cut | ||
RC Hole @ Mother Lode Drilled North of ML18-083 | ML-18-093 | 371.86 | 487.68 | 115.82 | 1.83 | n/a | ||
inc | 381.00 | 409.96 | 28.96 | 1.96 | n/a | 1 g/t cut | ||
inc | 428.24 | 475.49 | 47.25 | 2.65 | n/a | 1 g/t cut | ||
RC Hole @ Mother Lode Drilled East of ML18-093 | ML-18-094 | 332.23 | 335.28 | 3.05 | 0.71 | n/a | ||
inc | 339.85 | 349.00 | 9.15 | 1.02 | n/a | |||
355.09 | 370.33 | 15.24 | 1.76 | n/a | ||||
AZ 085 dip-68 | 355.09 | 364.24 | 9.15 | 2.69 | n/a | 1 g/t cut | ||
RC Hole @ Mother Lode Drilled East of ML18-092 | ML-18-095 | 355.09 | 376.43 | 21.34 | 0.48 | n/a | ||
385.57 | 402.34 | 16.77 | 0.54 | n/a | ||||
AZ 085 dip-68 | 409.96 | 414.53 | 4.57 | 0.69 | n/a |
Hole Location |
Hole ID | From (m) | To (m) | Interval (m) | Gold (g/t) | Silver (g/t) | Comments | |
Released Jan 22, 2019 *Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t and 1 g/t cutoff |
West of ML18-084Western Zone |
ML18-086 | 300.23 | 326.14 | 25.91 | 1.45 | n/a | |
inc | 300.23 | 315.47 | 15.24 | 1.89 | n/a | 1 g/t cut | ||
AZ 085 dip-75 | 368.81 | 370.33 | 1.52 | 0.39 | n/a | |||
West of ML18-083 Western Zone |
ML18-087 | 349.00 | 390.14 | 41.14 | 1.32 | n/a | ||
inc | 349.00 | 377.95 | 28.95 | 1.60 | n/a | 1 g/t cut | ||
AZ 080 dip-80 | 413.00 | 460.25 | 47.25 | 2.15 | n/a | grade to EOH | ||
inc | 416.05 | 455.68 | 39.63 | 2.48 | n/a | 1 g/t cut | ||
West of ML17-005 Western Zone |
ML18-088 | 192.02 | 204.22 | 12.20 | 0.48 | n/a | ||
208.79 | 230.12 | 21.33 | 0.76 | n/a | ||||
inc | 216.41 | 220.98 | 4.57 | 1.46 | n/a | 1 g/t cut | ||
236.22 | 239.27 | 3.05 | 0.42 | n/a | ||||
AZ 090 dip-80 | 291.08 | 318.52 | 27.44 | 2.26 | n/a | |||
inc | 292.61 | 313.94 | 21.33 | 2.81 | n/a | 1 g/t cut |
Hole Location |
Hole ID | From (m) | To (m) | Interval (m) | Gold (g/t) | Silver (g/t) | Comments | |
Released Feb 21,2019 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t and 1 g/t cutoff |
East of ML18-080 Eastern Zone |
ML18-089 | 179.83 | 210.31 | 30.48 | 1.30 | n/a | |
inc | 179.83 | 198.12 | 18.29 | 1.66 | n/a | 1 g/t cut | ||
252.98 | 274.32 | 21.34 | 1.69 | n/a | ||||
inc | 252.98 | 263.65 | 10.67 | 2.94 | n/a | 1 g/t cut | ||
AZ 090 dip-70 | 318.52 | 323.09 | 4.57 | 0.53 | n/a | |||
East of ML17-024 East Pit Area |
ML18-090 | 0.00 | 38.10 | 38.10 | 2.58 | n/a | ||
inc | 0.00 | 19.80 | 19.80 | 4.51 | n/a | 1 g/t cut | ||
44.20 | 53.34 | 9.14 | 0.51 | n/a | ||||
AZ 090 dip-60 | 60.96 | 68.58 | 7.62 | 0.55 | n/a | |||
172.21 | 175.26 | 3.05 | 0.47 | n/a | ||||
West of ML17-023East Pit Area |
ML18-091 | 65.53 | 70.10 | 4.57 | 0.98 | n/a | ||
74.68 | 83.82 | 9.14 | 1.08 | n/a | ||||
inc | 80.77 | 83.82 | 3.05 | 2.25 | n/a | 1 g/t cut | ||
AZ 090 dip-70 | 96.01 | 102.11 | 6.10 | 1.13 | n/a | |||
East of ML18-090Eastern Zone - ox |
ML18-099 | 271.27 | 312.42 | 41.15 | 1.02 | n/a | ||
inc | 272.80 | 280.42 | 7.62 | 1.25 | n/a | 1 g/t cut-ox | ||
inc | 288.04 | 300.23 | 12.19 | 1.72 | n/a | 1 g/t cut-ox | ||
AZ 090 dip-50 | 320.04 | 323.09 | 3.05 | 0.50 | n/a | oxide | ||
East of ML18-084 Eastern Zone |
ML18-100 | 269.75 | 277.37 | 7.62 | 3.61 | n/a | ||
301.75 | 304.80 | 3.05 | 0.61 | n/a | 1 g/t cut | |||
AZ 090 dip-65 | 338.33 | 344.42 | 6.09 | 0.63 | n/a | |||
350.52 | 353.57 | 3.05 | 0.33 | n/a | 1 g/t cut | |||
East of ML17-003 Eastern Zone |
ML18-101 | 281.94 | 298.70 | 16.76 | 0.61 | n/a | ||
AZ 090 dip-70 | 359.66 | 368.81 | 9.15 | 0.43 | n/a | |||
West of ML17-012 Western Zone |
ML18-102 | 176.78 | 190.50 | 13.72 | 0.61 | n/a | ||
220.98 | 228.60 | 7.62 | 0.71 | n/a | ||||
inc | 222.50 | 225.55 | 3.05 | 1.16 | n/a | 1 g/t cut | ||
AZ 090 dip-80 | 243.84 | 275.84 | 32.00 | 2.10 | n/a | |||
inc | 245.36 | 274.32 | 28.96 | 2.26 | n/a | 1 g/t cut | ||
ML18-103 | 345.95 | 368.81 | 22.86 | 2.24 | n/a | AZ 085 dip-85 |
ML Plan Map Feb 21 2019
Hole Location |
Hole ID | From (m) |
To (m) |
Interval (m) | Gold (g/t) |
Silver (g/t) |
Comments | |
Released Mar 19, 2019 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t, 1 g/t and 2 g/t cutoff |
West of ML18-092 North Zone AZ 080 dip-85 |
ML19-104 | 409.96 | 536.45 | 126.49 | 1.85 | n/a | |
inc | 445.01 | 461.77 | 16.76 | 2.12 | n/a | 1 g/t cut | ||
inc | 473.96 | 512.06 | 38.10 | 2.71 | n/a | 1 g/t cut | ||
inc | 473.00 | 492.3 | 18.30 | 4.20 | n/a | 2 g/t cut | ||
inc | 518.16 | 534.92 | 16.76 | 4.43 | n/a | 1 g/t cut | ||
inc | 522.69 | 533.40 | 10.70 | 6.28 | n/a | 2 g/t cut | ||
East of ML18-094 |
ML19-105 | 512.06 | 518.16 | 6.10 | 0.68 | n/a | ||
AZ 085 dip-65 | ||||||||
West of ML18-086 |
ML19-106 | 0.00 | 6.10 | 6.10 | 0.59 | n/a | ||
AZ 090 dip-50 | 57.91 | 64.01 | 6.10 | 0.30 | n/a |
ML Plan Map Mar 19 2019
Hole Location |
Hole ID | From (m) |
To (m) |
Interval (m) | Gold (g/t) |
Silver (g/t) |
Comments | |
Released Apr. 3, 2019 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t, 1 g/t and 2 g/t cutoff |
||||||||
East of ML17-024 East Zone |
ML19-107 | 47.24 | 56.39 | 9.15 | 0.63 | n/a | ||
201.17 | 207.26 | 6.09 | 0.99 | n/a | OX Pz | |||
220.98 | 230.12 | 9.14 | 0.51 | n/a | OX Pz | |||
246.89 | 249.94 | 3.05 | 0.42 | n/a | OX Pz | |||
AZ 090 dip-45 | 256.03 | 260.60 | 4.57 | 0.72 | n/a | OX Pz | ||
East of ML17-023 Southeast Zone |
ML19-108 | 12.19 | 21.34 | 9.15 | 0.13 | n/a | L-G Hits using 0.10 cutoff |
|
AZ 180 dip-90 | 105.16 | 108.20 | 3.04 | 0.17 | n/a | |||
Below ML18-089 Deep Zone |
ML19-109 | 121.92 | 129.54 | 7.62 | 0.48 | n/a | ||
155.45 | 170.69 | 15.24 | 0.55 | n/a | OX | |||
181.36 | 182.88 | 1.52 | 0.45 | n/a | OX | |||
205.74 | 214.88 | 9.14 | 1.17 | n/a | OX | |||
227.08 | 268.22 | 41.14 | 2.83 | n/a | Sulfide Zone | |||
355.09 | 361.19 | 6.10 | 0.81 | n/a | OX halo | |||
374.90 | 405.38 | 30.48 | 1.71 | n/a | Intrusive | |||
AZ 085 dip-85 | 414.53 | 416.05 | 1.52 | 4.14 | n/a | EOH |
ML Plan Map Apr 3 2019
Hole Location |
Hole ID | From (m) |
To (m) |
Interval (m) | Gold (g/t) |
Silver (g/t) |
Comments | |
Released June 3, 2019 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t & 1 g/t |
West of ML18-045 West Zone |
ML19-111 | 278.89 | 306.32 | 27.43 | 0.89 | n/a | |
inc | 284.99 | 288.04 | 3.05 | 1.19 | n/a | 1 g/t cut | ||
345.95 | 361.19 | 15.24 | 1.15 | n/a | ||||
inc | 347.47 | 352.04 | 4.57 | 2.68 | n/a | 1 g/t cut | ||
AZ 085 dip-80 | 365.76 | 374.90 | 9.14 | 0.49 | n/a | |||
West of ML18-068 West Zone |
ML19-112 | 414.53 | 432.82 | 18.29 | 1.89 | n/a | ||
AZ 085 dip-87 | ||||||||
West ML17-007 Southwest Zone |
ML19-115 | 121.92 | 128.02 | 6.10 | 0.56 | n/a | ||
AZ 090 dip-75 | 150.88 | 155.45 | 4.57 | 0.45 | n/a | OX Zone | ||
172.21 | 196.60 | 24.39 | 0.74 | n/a | OX Zone | |||
220.98 | 248.41 | 27.43 | 1.28 | n/a | ||||
West ML17-014 Southwest Zone |
ML19-116 | 143.26 | 147.83 | 4.57 | 0.92 | n/a | ||
AZ 085 dip-70 | 170.69 | 207.26 | 36.57 | 2.03 | n/a | |||
289.56 | 315.47 | 25.91 | 2.43 | n/a | Deep Zone | |||
inc | 297.18 | 315.47 | 18.29 | 3.30 | n/a | 1 g/t cut |
ML Plan Map Jun 3 2019
Hole Location | Hole ID | From (m) |
To (m) |
Interval (m) | Gold (g/t) |
Silver (g/t) |
Comments | |
Released June 11, 2019 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t & 1 g/t |
East of ML18-064 East Zone |
ML19-110 | 441.96 | 449.58 | 7.62 | 0.75 | n/a | AZ 085 dip-50 |
West of ML18-083 |
ML19-113 | 413.00 | 432.82 | 19.82 | 0.57 | n/a | AZ 080 dip-85 |
|
inc | 417.58 | 420.62 | 3.05 | 1.36 | n/a | |||
North ML18-092 North Zone |
ML19-114 | 451.10 | 454.15 | 3.05 | 0.54 | n/a | ||
AZ 080 dip-87 | 470.92 | 484.63 | 13.71 | 0.67 | n/a | OX Zone | ||
516.64 | 565.40 | 48.76 | 1.15 | n/a | Lost hole | |||
inc | 534.92 | 565.40 | 30.48 | 1.56 | n/a | 1 g/t cut | ||
East of ML18-048 East Zone |
ML19-117 | 329.18 | 332.23 | 3.05 | 0.68 | n/a | AZ 085 dip-65 |
|
North of ML18-083 Upper Ox Zone |
ML19-118 | 359.66 | 396.24 | 36.58 | 1.59 | n/a | Lost in upper OX before Main Zone |
|
AZ 080 dip-85 | 408.43 | 422.15 | 13.72 | 0.45 | n/a |
Hole Location | Hole ID | From (m) |
To (m) |
Interval (m) | Gold (g/t) |
Silver (g/t) |
Comments | |
Released December 5, 2019* Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t & 1 g/t |
SW Target Main zone |
ML19-119 | 184.40 | 210.31 | 25.91 | 1.42 | n/a | |
inc | 184.4 | 202.69 | 18.29 | 1.81 | n/a | 1 g/t cut | ||
AZ 090 dip-65 | 286.51 | 294.13 | 7.62 | 0.60 | n/a | Upper OX zone | ||
306.32 | 356.62 | 50.30 | 1.50 | n/a | New Deep Zone | |||
inc | 318.52 | 352.04 | 33.52 | 1.94 | n/a | 1 g/t cut | ||
SW Target | ML19-120 | 99.06 | 105.16 | 6.10 | 0.24 | n/a | Upper OX zone | |
AZ 085 dip-75 | 156.97 | 163.07 | 6.10 | 0.40 | n/a | Upper OX zone | ||
195.07 | 222.50 | 27.43 | 1.76 | n/a | Main Zone | |||
inc | 201.17 | 220.10 | 18.93 | 2.09 | n/a | 1 g/t cut | ||
289.56 | 300.23 | 10.67 | 0.53 | n/a | Lower OX zone | |||
338.33 | 344.42 | 6.09 | 0.36 | n/a | Lower OX zone |
ML Plan Map Dec 5 2019
Hole Location | Hole ID | From (m) |
To (m) |
Interval (m) | Gold (g/t) |
Silver (g/t) |
Comments | |
Released Jan 14, 2020 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t and 1 g/t cutoff |
Central Target & New Central Intrusive Zone (below Central Target) |
ML19-121 | 129.54 | 146.30 | 16.76 | 0.34 | n/a | Upper OX zone |
AZ 085 dip-73 | 150.88 | 153.92 | 3.05 | 0.50 | n/a | Upper OX zone | ||
166.12 | 202.69 | 36.57 | 1.79 | n/a | Main zone | |||
213.36 | 219.46 | 6.10 | 0.66 | n/a | Lower Oxide | |||
New CIZ | 330.71 | 371.86 | 41.15 | 1.60 | n/a | Oxide Zone 0.1 g/t cut |
||
inc | 338.33 | 347.47 | 9.14 | 0.98 | n/a | Oxide Sediments | ||
inc | 352.04 | 367.28 | 15.24 | 3.60 | n/a | Oxide Intrusive | ||
358.1 | 364.2 | 6.10 | 5.30 | n/a | 2 g/t cut | |||
Central Target & New Central Intrusive Zone (below Central Target) |
ML19-122 | 99.06 | 106.68 | 7.62 | 0.52 | n/a | Upper OX zone | |
AZ 087 dip-73 | 112.78 | 124.97 | 12.19 | 0.80 | n/a | Upper OX zone | ||
inc | 118.87 | 123.44 | 4.57 | 1.20 | n/a | 1 g/t cut | ||
153.92 | 190.50 | 36.58 | 2.43 | n/a | Main Zone | |||
inc | 153.92 | 181.36 | 27.44 | 3.09 | n/a | 1 g/t cut | ||
201.17 | 228.60 | 27.43 | 2.42 | n/a | Main Zone | |||
268.22 | 281.94 | 13.72 | 0.66 | n/a | Lower OX zone | |||
310.90 | 321.56 | 10.66 | 1.09 | n/a | Lower OX zone | |||
inc | 310.90 | 313.94 | 3.04 | 2.08 | n/a | 1 g/t cut |
ML Plan Map Jan 14 2020
Hole Location | Hole ID | From (m) |
To (m) |
Interval (m) | Gold (g/t) |
Silver (g/t) |
Comments | |
Released Jan 30, 2020 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t and 1 & 2 g/t cutoff |
Central Target & New Central Intrusive Zone (below Central Target) |
ML19-124 | 281.94 | 286.51 | 4.57 | 0.45 | n/a | Upper OX zone |
AZ 080 dip-77 | 291.08 | 294.13 | 3.05 | 0.62 | n/a | Upper OX zone | ||
318.52 | 377.95 | 59.43 | 1.51 | n/a | Main zone | |||
inc | 350.08 | 365.28 | 15.2 | 2.99 | n/a | 2 g/t cut | ||
CIZ Oxide Zone | 391.67 | 399.29 | 7.62 | 0.66 | n/a | Lost hole entering zone | ||
Central Target & New Central Intrusive Zone (below Central Target) |
ML19-128 | 105.16 | 132.59 | 27.43 | 1.24 | n/a | Main Zone | |
inc | 111.25 | 124.97 | 13.72 | 1.85 | n/a | 1 g/t cut | ||
AZ 090 dip-75 | 138.68 | 147.83 | 9.15 | 0.61 | n/a | Lower Oxide | ||
156.97 | 163.07 | 6.10 | 0.61 | n/a | Lower Oxide | |||
176.78 | 182.88 | 6.10 | 0.47 | n/a | Lower Oxide | |||
CIZ Oxide Zone | 227.08 | 231.65 | 4.57 | 0.48 | n/a | CIZ | ||
CIZ Oxide Zone | 236.22 | 259.08 | 22.86 | 1.62 | n/a | CIZ | ||
inc | 245.36 | 256.03 | 10.67 | 1.89 | n/a | 1 g/t cut | ||
CIZ Oxide Zone | 263.65 | 271.27 | 7.62 | 0.57 | n/a | Lost Hole in zone |
ML Plan Map Jan 30 2020
Hole Location | Hole ID | From (m) |
To (m) |
Interval (m) | Gold (g/t) |
Silver (g/t) |
Comments | |
Released Feb 20, 2020 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t and 1 & 2 g/t cutoff |
Diamond Core |
ML19-125-CT AZ 090 dip-75 |
458.11 | 462.15 | 4.04 | 0.79 | 2.39 | Upper OX zone |
470.76 | 490.06 | 19.30 | 2.79 | 6.29 | Main zone intrusive dike | |||
inc | 471.83 | 488.90 | 17.07 | 3.10 | 7.08 | 1 g/t cut | ||
inc | 477.5 | 488.90 | 11.4 | 4.01 | 10.4 | 2 g/t cut | ||
494.17 | 498.13 | 3.96 | 1.95 | 0.31 | Main zone intrusive dike | |||
501.64 | 514.50 | 12.86 | 2.91 | 0.74 | Main zone intrusive dike | |||
518.28 | 526.18 | 7.90 | 1.52 | 1.08 | Main zone intrusive dike | |||
AZ 090 dip-75 | 541.02 | 547.36 | 6.34 | 0.45 | 5.33 | Potentiel CIZ Oxide Zone |
ML Plan Map Feb 20 2020
Hole Location | Hole ID | From (m) |
To (m) |
Interval (m) | Gold (g/t) |
Silver (g/t) |
Comments | |
Released Feb 25, 2020 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t and 1 & 2 g/t cutoff |
RC Hole, Eastern Boundary | ML20-129 | 216.41 | 225.55 | 9.14 | 0.67 | n/a | Upper OX zone |
AZ 000 dip-90 | ||||||||
RC Hole, Central Main Zone |
ML20-130 | 190.50 | 193.55 | 3.05 | 0.49 | n/a | Upper OX zone |
|
214.88 | 231.65 | 16.77 | 0.78 | n/a | Main Zone | |||
inc | 217.93 | 222.50 | 4.57 | 1.78 | n/a | 1 g/t cut | ||
242.32 | 330.71 | 88.39 | 1.92 | n/a | Main Zone | |||
inc | 256.03 | 320.04 | 64.01 | 2.27 | n/a | 1 g/t cut | ||
inc | 324.61 | 329.18 | 4.57 | 1.92 | n/a | 1 g/t cut | ||
347.47 | 356.62 | 9.15 | 1.20 | n/a | Main Zone | |||
inc | 349.00 | 356.62 | 7.62 | 1.32 | n/a | 1 g/t cut | ||
AZ 090 dip-75 | 359.66 | 361.19 | 1.53 | 1.98 | n/a | CIZ Lost hole, |
||
RC Hole, Central Main Zone |
ML20-131 | 109.73 | 115.82 | 6.09 | 0.39 | n/a | Upper OX zone | |
143.26 | 147.83 | 4.57 | 0.86 | n/a | Upper OX zone | |||
158.50 | 214.88 | 56.38 | 1.92 | n/a | Main Zone | |||
inc | 158.50 | 208.79 | 50.29 | 2.10 | n/a | 1 g/t cut | ||
350.52 | 355.09 | 4.57 | 1.43 | n/a | CIZ Oxide Zone |
|||
AZ 090 dip-80 | 362.71 | 367.28 | 4.57 | 0.34 | n/a | Lost hole, poor recovery |
ML Plan Map Feb 25 2020
Hole Location | Hole ID | From (m) |
To (m) |
Interval (m) |
Gold (g/t) |
Silver (g/t) |
Comments | |
Released Apr 15, 2020 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t and 1 g/t cutoff |
RC Hole, Central Main Zone |
ML20-132 | 198.12 | 245.36 | 47.24 | 1.43 | n/a | Main Zone |
inc | 201.17 | 230.12 | 28.95 | 1.88 | n/a | 1 g/t cut | ||
AZ 090 dip-85 | 336.80 | 339.85 | 3.05 | 0.43 | n/a | CIZ Lost hole, poor recovery | ||
RC Hole, Central Main Zone |
ML20-133 | 134.11 | 143.26 | 9.15 | 0.70 | n/a | Upper OX zone | |
AZ 085 dip-78 | 243.84 | 286.51 | 42.67 | 1.98 | n/a | Main Zone | ||
inc | 243.84 | 281.94 | 38.10 | 2.16 | n/a | 1 g/t cut | ||
391.67 | 397.76 | 6.09 | 0.32 | n/a | ||||
405.38 | 423.67 | 18.29 | 1.82 | n/a | CIZ Lost hole, poor recovery | |||
inc | 408.43 | 413.00 | 4.57 | 2.70 | n/a | 1 g/t cut | ||
RC Hole, Eastern Boundary Target |
ML20-138 | 316.99 | 329.18 | 12.19 | 0.19 | n/a | Main Zone | |
335.28 | 352.04 | 16.76 | 0.36 | n/a | Main Zone | |||
AZ 360 dip-90 | 374.90 | 384.05 | 9.15 | 0.50 | n/a | Lower OX zone |
ML Plan Map Apr 15 2020
Hole Location | Hole ID | From (m) | To (m) | Interval (m) | Gold (g/t) | Silver (g/t) | Comments | |
Released May 13, 2020 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.1 g/t and 1 g/t cutoff |
Diamond Core Hole, Central Main Zone through the Central Intrusive Zone (CIZ) |
ML19-123CT AZ 080 dip-77 |
143.95 | 186.84 | 42.89 | 0.72 | 0.65 | Upper Oxide Zone |
152.90 | 163.98 | 11.08 | 1.40 | 0.92 | 1 g/t cut | |||
246.02 | 284.17 | 38.15 | 1.97 | 2.14 | Main Zone | |||
247.60 | 253.29 | 5.69 | 2.59 | 2.28 | 1 g/t cut | |||
256.15 | 284.17 | 28.02 | 2.06 | 2.24 | 1 g/t cut | |||
290.12 | 293.31 | 3.19 | 0.14 | 1.04 | 0.1 g/t cut | |||
322.48 | 326.67 | 4.19 | 0.11 | 0.51 | 0.1 g/t cut | |||
376.81 | 502.31 | 125.50 | 2.56 | 3.18 | CIZ Oxide Zone 0.1 g/t cut |
|||
385.36 | 400.20 | 14.84 | 8.88 | 2.85 | 1 g/t cut | |||
404.08 | 409.59 | 5.51 | 2.65 | 0.08 | 1 g/t cut | |||
411.04 | 419.10 | 8.06 | 3.28 | 2.33 | 1 g/t cut | |||
426.65 | 459.92 | 33.27 | 3.77 | 7.28 | 1 g/t cut | |||
519.07 | 593.75 | 74.68 | 0.62 | 0.58 | 0.1 g/t cut | |||
562.78 | 567.74 | 4.96 | 1.73 | 0.06 | 1 g/t cut | |||
571.66 | 580.87 | 9.21 | 1.56 | 0.02 | 1 g/t cut |
ML Plan Map May 13, 2020
Hole Location | Hole ID | From (m) | To (m) | Interval (m) | Gold (g/t) | Silver (g/t) | Comments | |
Released July 16, 2020 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals calculated using 0.1 g/t & 1 g/t cutoff |
RC Hole, Lynnda Strip, 2.5km north-northeast of Mother Lode claim block |
CH20-011 | 263.7 | 460.3 | 196.6 | 0.44 | n/a | total oxide zone |
AZ350 dip-70 | 263.7 | 283.5 | 19.8 | 0.74 | n/a | |||
inc | 263.7 | 268.2 | 4.5 | 1.44 | n/a | 1 g/t cut | ||
341.4 | 406.9 | 65.5 | 0.45 | n/a | ||||
inc | 347.5 | 350.5 | 3.0 | 1.25 | n/a | 1 g/t cut | ||
416.0 | 460.2 | 44.2 | 0.90 | n/a | ||||
inc | 425.2 | 428.2 | 3.0 | 5.52 | n/a | 1 g/t cut | ||
Hole Location | Hole ID | From (m) | To (m) | Interval (m) | Gold (g/t) | Silver (g/t) | Comments | |
Released August 18, 2020 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals calculated using 0.3 g/t & 1 g/t cutoff |
Diamond Core- tail Hole, Central Main Zone through the Central Intrusive Zone (CIZ) |
ML20-134CT | 183.58 | 203.61 | 20.03 | 0.41 | 0.32 | Upper Ox Zone 0.1 g/t cut |
AZ 090 dip-70 | 217.32 | 234.09 | 16.77 | 0.14 | 1.96 | Upper Ox Zone 0.1 g/t cut |
||
246.93 | 269.14 | 22.21 | 0.43 | 0.54 | Upper Ox Zone 0.1 g/t cut |
|||
273.31 | 287.27 | 13.96 | 2.06 | 3.64 | Main Zone | |||
inc | 273.31 | 281.94 | 8.63 | 2.97 | 4.78 | 1 g/t cut | ||
320.95 | 331.38 | 10.43 | 0.27 | 0.52 | CIZ 0.1 g/t cut |
|||
431.23 | 455.07 | 23.84 | 0.96 | 0.66 | CIZ 0.1 g/t cut |
|||
inc | 444.99 | 453.54 | 8.55 | 2.21 | 1.39 | 1 g/t cut | ||
468.36 | 497.19 | 28.83 | 2.21 | 1.06 | CIZ 0.1 g/t cut |
|||
inc | 472.08 | 490.52 | 18.44 | 3.01 | 1.54 | 1 g/t cut | ||
509.12 | 538.89 | 29.77 | 0.25 | 0.38 | CIZ 0.1 g/t cut |
|||
624.23 | 631.53 | 7.30 | 0.40 | 0.77 | CIZ 0.1 g/t cut |
|||
Diamond Core- tail Hole, Central Main Zone through the Central Intrusive Zone (CIZ) |
ML20-141CT | 341.25 | 363.44 | 22.19 | 2.11 | 2.10 | Main Zone | |
inc | 424.28 | 427.55 | 3.27 | 0.18 | 1.25 | 1 g/t cut | ||
AZ 085 dip-70 | 532.16 | 548.00 | 15.84 | 0.41 | 0.13 | CIZ 0.1 g/t cut |
||
566.01 | 572.11 | 6.10 | 0.57 | 0.18 | CIZ 0.1 g/t cut |
|||
580.10 | 644.97 | 64.87 | 1.02 | 0.91 | CIZ 0.1 g/t cut |
|||
inc | 585.83 | 597.57 | 11.74 | 3.87 | 1.55 | 1 g/t cut | ||
664.16 | 672.69 | 8.53 | 0.37 | 0.56 | CIZ 0.1 g/t cut |
|||
Diamond Core- tail Hole, Central Main Zone through the Central Intrusive Zone (CIZ) |
ML20-143CT | 312.27 | 315.23 | 2.96 | 0.58 | 0.70 | Main Zone | |
AZ 085 dip-70 | 321.44 | 355.93 | 34.49 | 1.63 | 2.01 | Main Zone | ||
inc | 322.72 | 351.59 | 28.87 | 1.84 | 1.90 | 1 g/t cut | ||
357.23 | 359.05 | 1.82 | 0.23 | 0.62 | CIZ 0.1 g/t cut |
|||
374.29 | 378.87 | 4.58 | 0.29 | 0.25 | CIZ 0.1 g/t cut |
|||
406.30 | 454.46 | 48.16 | 1.23 | 2.32 | CIZ 0.1 g/t cut |
|||
inc | 409.04 | 410.71 | 1.67 | 1.10 | 1.41 | 1 g/t cut | ||
inc | 423.75 | 449.58 | 25.83 | 1.98 | 3.76 | 1 g/t cut | ||
485.55 | 493.78 | 8.23 | 0.13 | 0.18 | CIZ 0.1 g/t cut |
|||
Diamond Core- tail Hole, Central Main Zone through the Central Intrusive Zone (CIZ) |
ML20-149CT | 163.89 | 167.00 | 3.11 | 0.18 | 0.15 | Upper Ox Zone 0.1 g/t cut |
|
AZ 080 dip-70 | 198.22 | 202.85 | 4.63 | 0.18 | 0.52 | Upper Ox Zone 0.1 g/t cut |
||
205.13 | 212.75 | 7.62 | 0.44 | 0.47 | Upper Ox Zone 0.1 g/t cut |
|||
221.16 | 227.43 | 6.27 | 0.18 | 0.57 | Upper Ox Zone 0.1 g/t cut |
|||
236.42 | 249.33 | 12.91 | 0.46 | 2.13 | Main Zone | |||
260.11 | 281.57 | 21.46 | 3.48 | 2.30 | Main Zone | |||
286.17 | 295.78 | 9.61 | 1.81 | 1.96 | Main Zone | |||
inc | 286.71 | 293.62 | 6.91 | 2.36 | 2.30 | 1 g/t cut | ||
317.91 | 327.05 | 9.14 | 0.15 | 0.50 | CIZ 0.1 g/t cut |
|||
331.62 | 334.67 | 3.05 | 0.26 | 0.67 | CIZ 0.1 g/t cut |
|||
340.77 | 395.83 | 55.06 | 1.40 | 0.00 | CIZ 0.1 g/t cut |
|||
inc | 340.77 | 360.67 | 19.90 | 1.60 | 0.57 | CIZ 0.1 g/t cut |
||
inc | 346.86 | 353.63 | 6.77 | 4.03 | 1.21 | 1 g/t cut | ||
inc | 363.02 | 395.83 | 32.81 | 1.34 | 2.01 | CIZ 0.1 g/t cut |
||
inc | 366.16 | 372.19 | 6.03 | 1.91 | 0.60 | 1 g/t cut | ||
inc | 378.87 | 389.14 | 10.27 | 2.61 | 4.81 | 1 g/t cut | ||
404.18 | 430.74 | 26.56 | 0.23 | 1.94 | CIZ 0.1 g/t cut |
|||
453.54 | 468.33 | 14.79 | 0.19 | 0.79 | CIZ 0.1 g/t cut |
|||
490.74 | 520.54 | 29.80 | 0.27 | 0.58 | CIZ 0.1 g/t cut |
|||
Diamond Core- tail Hole, Central Main Zone through the Central Intrusive Zone (CIZ) |
ML20-151CT | 136.55 | 151.51 | 14.96 | 0.48 | 0.56 | Upper Oxide Zone | |
AZ 085 dip-70 | 211.23 | 267.61 | 56.38 | 1.71 | 1.62 | Main Zone | ||
inc | 211.23 | 215.80 | 4.57 | 2.32 | 2.37 | 1 g/t cut | ||
inc | 218.78 | 264.05 | 45.27 | 1.81 | 1.50 | 1 g/t cut | ||
340.98 | 346.90 | 5.92 | 0.72 | 0.97 | CIZ Zone | |||
inc | 344.45 | 346.90 | 2.45 | 1.30 | 0.73 | 1 g/t cut | ||
359.29 | 386.49 | 27.20 | 0.89 | 1.54 | ||||
inc | 366.82 | 371.33 | 4.51 | 1.32 | 0.48 | 1 g/t cut | ||
inc | 374.79 | 377.99 | 3.20 | 2.85 | 7.08 | 1 g/t cut | ||
405.81 | 412.09 | 6.28 | 0.50 | 1.73 | ||||
415.88 | 427.33 | 11.45 | 0.67 | 2.77 | ||||
inc | 415.88 | 417.49 | 1.61 | 2.01 | 3.20 | 1 g/t cut | ||
461.83 | 466.80 | 4.97 | 0.28 | 0.72 | 0.1 g/t cut | |||
545.04 | 555.59 | 10.55 | 0.21 | 0.75 | 0.1 g/t cut | |||
561.75 | 564.79 | 3.04 | 0.22 | 0.76 | 0.1 g/t cut | |||
Diamond Core- tail Hole, North Main Zone |
ML19-126CT | 480.97 | 525.78 | 44.81 | 0.91 | 1.91 | 0.1 g/t cut | |
inc | 503.25 | 520.50 | 17.25 | 1.44 | 2.61 | 1 g/t cut | ||
AZ 090 dip-83 | 681.84 | 689.14 | 7.30 | 0.57 | 0.43 | CIZ (first dike) 0.1 g/t cut |
||
Diamond Core- tail Hole, North Main Zone |
ML19-127CT | 582.26 | 599.55 | 17.29 | 0.80 | 2.64 | ||
inc | 582.26 | 586.13 | 3.87 | 1.52 | 1.34 | 1 g/t cut | ||
617.59 | 622.40 | 4.81 | 1.38 | 0.71 | Main Zone | |||
669.95 | 681.65 | 11.70 | 0.64 | 0.58 | CIZ 0.1 g/t cut |
|||
AZ 090 dip-83 | 701.65 | 706.53 | 4.88 | 0.18 | 0.27 | CIZ 0.1 g/t cut |
||
Diamond Core- tail Hole,North Main Zone |
ML20-136CT | 452.75 | 475.49 | 22.74 | 1.92 | 2.19 | ||
inc | 453.33 | 467.78 | 14.45 | 2.64 | 2.41 | 1 g/t cut | ||
AZ 085 dip-80 | 483.18 | 488.78 | 5.60 | 0.20 | 0.57 | CIZ 0.1 g/t cut |
||
494.69 | 515.26 | 20.57 | 0.15 | 0.39 | CIZ 0.1 g/t cut |
|||
521.82 | 565.86 | 44.04 | 0.15 | 0.40 | CIZ 0.1 g/t cut |
|||
576.99 | 587.46 | 10.47 | 0.14 | 0.46 | CIZ 0.1 g/t cut |
|||
621.18 | 631.64 | 10.46 | 0.79 | 0.79 | CIZ 0.1 g/t cut |
|||
inc | 625.37 | 629.20 | 3.83 | 1.75 | 1.87 | 1 g/t cut | ||
641.51 | 642.77 | 1.26 | 0.76 | 0.32 | CIZ 0.1 g/t cut |
|||
656.23 | 659.28 | 3.05 | 0.68 | 0.24 | CIZ 0.1 g/t cut |
|||
Diamond Core- tail Hole, North Main Zone |
ML20-147CT | 500.48 | 516.33 | 15.85 | 1.15 | 2.98 | ||
518.77 | 521.82 | 3.05 | 0.90 | 13.34 | ||||
AZ 085 dip-80 | 566.01 | 579.39 | 13.38 | 0.19 | 0.74 | Top of CIZ 0.1 g/t cut |
Hole Location | Hole ID | From (m) | To (m) | Interval (m) | Gold (g/t) | Silver (g/t) | Comments | |
Released October 1, 2020 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals calculated using 0.3 g/t & 1 g/t cutoff |
Diamond Core-tail Hole, Central Main Zone through the Central Intrusive Zone (CIZ) |
ML20-137CT | 391.77 | 422.37 | 30.60 | 1.34 | 3.38 | Main Zone |
inc | 408.38 | 420.44 | 12.06 | 1.65 | 5.30 | 1g/t cut, high of 46 g/t Ag | ||
AZ 090 dip-70 | 471.67 | 477.32 | 5.65 | 0.17 | 0.18 | CIZ 0.1 cut |
||
481.28 | 492.52 | 11.24 | 0.54 | 1.11 | CIZ 0.1 cut |
|||
501.93 | 505.66 | 3.73 | 0.12 | 340 | High Silver intercept | |||
509.24 | 516.33 | 7.09 | 0.12 | 0.30 | CIZ 0.1 cut |
|||
546.20 | 578.85 | 32.65 | 0.73 | 0.37 | CIZ 0.1 cut |
|||
inc | 564.18 | 576.23 | 12.05 | 1.50 | 0.56 | 1 g/t cut | ||
587.58 | 619.96 | 32.38 | 0.46 | 0.52 | CIZ 0.1 cut |
|||
inc | 595.84 | 599.86 | 4.02 | 1.08 | 1.22 | 1 g/t cut | ||
632.30 | 637.95 | 5.65 | 0.15 | 0.32 | CIZ 0.1 cut |
|||
RC Hole, Southwest Target |
ML20-139 | 286.51 | 307.85 | 21.34 | 0.26 | 0.60 | Main Zone 0.1 g/t cut |
|
inc | 292.61 | 297.18 | 4.57 | 0.77 | 1.22 | |||
AZ 085 dip-70 | 310.90 | 332.23 | 21.33 | 0.24 | 0.49 | 0.1 g/t cut | ||
Diamond Core-tail Hole, Central Main Zone through the Central Intrusive Zone (CIZ) |
ML20-144CT | 366.37 | 411.25 | 44.88 | 1.67 | 2.15 | Main Zone | |
AZ 085 dip-65 | 418.95 | 447.14 | 28.19 | 0.35 | 1.32 | 0.1 g/t cut | ||
inc | 418.95 | 427.40 | 8.45 | 0.52 | 1.85 | |||
inc | 432.97 | 435.28 | 2.31 | 0.59 | 2.00 | |||
inc | 441.05 | 447.14 | 6.09 | 0.36 | 1.56 | |||
494.39 | 517.25 | 22.86 | 0.22 | 0.15 | CIZ 0.1 g/t cut |
|||
inc | 512.67 | 515.72 | 3.05 | 0.67 | 0.07 | |||
524.87 | 535.53 | 10.66 | 0.88 | 0.11 | CIZ 0.1 g/t cut |
|||
inc | 526.08 | 529.29 | 3.21 | 2.64 | 0.13 | 1 g/t cut | ||
563.28 | 564.49 | 1.21 | 0.31 | 0.31 | ||||
Diamond Core-tail Hole, Central Main Zone through the Central Intrusive Zone (CIZ) | ML20-145CT | 389.53 | 417.10 | 27.57 | 1.21 | 2.56 | Main Zone | |
inc | 398.07 | 404.60 | 6.53 | 2.51 | 3.37 | 1 g/t cut | ||
inc | 408.63 | 409.42 | 0.79 | 1.47 | 5.84 | 1 g/t cut | ||
inc | 415.35 | 416.66 | 1.31 | 1.46 | 4.74 | 1 g/t cut | ||
420.62 | 438.79 | 18.17 | 0.21 | 0.82 | 0.1 g/t cut | |||
AZ 085 dip-70 | 583.62 | 600.91 | 17.29 | 1.18 | 1.84 | CIZ 0.1 g/t cut |
||
inc | 588.10 | 600.00 | 11.90 | 1.78 | 2.88 | |||
inc | 589.27 | 593.90 | 4.63 | 3.20 | 5.22 | 1 g/t cut | ||
Diamond Core-tail Hole, Central Main Zone through the Central Intrusive Zone (CIZ) | ML20-150CT | 134.92 | 174.80 | 39.88 | 0.68 | 0.68 | Upper Oxide Zone |
|
AZ 085 dip-70 | 221.12 | 225.18 | 4.06 | 1.11 | 1.20 | |||
232.93 | 276.76 | 43.83 | 2.60 | 3.11 | Main Zone | |||
340.77 | 343.34 | 2.57 | 0.95 | 0.36 | ||||
373.75 | 378.37 | 4.62 | 4.17 | 7.83 | CIZ 1 g/t cut |
|||
384.96 | 440.62 | 55.66 | 0.47 | 1.83 | CIZ 0.1 cut |
|||
398.13 | 410.87 | 12.74 | 1.09 | 3.05 | CIZ | |||
435.25 | 438.91 | 3.66 | 1.66 | 9.50 | 1 g/t cut | |||
543.46 | 569.37 | 25.91 | 0.22 | 0.85 | 0.1 g/t cut | |||
inc | 544.98 | 548.03 | 3.05 | 0.41 | 1.51 | |||
Diamond Core-tail Hole, Central Main Zone through the Central Intrusive Zone (CIZ) | ML20-152CT | 128.02 | 141.64 | 13.62 | 1.03 | 0.85 | Upper Oxide Zone |
|
AZ 085 dip-70 | 161.70 | 165.51 | 3.81 | 0.39 | 0.38 | |||
220.37 | 283.77 | 63.40 | 2.01 | 2.52 | Main Zone | |||
315.48 | 317.91 | 2.43 | 0.26 | 0.74 | 0.1 g/t cut | |||
361.98 | 369.42 | 7.44 | 0.19 | 0.82 | 0.1 g/t cut | |||
373.99 | 377.16 | 3.17 | 1.46 | 0.93 | 0.1 g/t cut | |||
390.17 | 424.59 | 34.42 | 0.61 | 2.69 | CIZ 0.1 g/t cut |
|||
inc | 390.17 | 408.80 | 18.63 | 0.88 | 3.12 | CIZ | ||
inc | 390.17 | 394.02 | 3.85 | 2.44 | 1.68 | 1 g/t cut | ||
414.68 | 421.54 | 6.86 | 0.39 | 2.79 | ||||
430.68 | 444.64 | 13.96 | 0.11 | 1.23 | CIZ 0.1 g/t cut |
|||
484.33 | 502.01 | 17.68 | 0.52 | 0.48 | CIZ | |||
532.33 | 573.94 | 41.61 | 0.65 | 1.05 | CIZ 0.1 g/t cut |
|||
inc | 534.10 | 541.93 | 7.83 | 2.56 | 3.46 | |||
inc | 564.40 | 572.41 | 8.01 | 0.34 | 0.96 | |||
Diamond Core-tail Hole, Central Main Zone through the Central Intrusive Zone (CIZ) | ML20-154CT | 198.85 | 236.95 | 38.10 | 0.43 | 0.43 | Upper Oxide Zone |
|
inc | 226.47 | 231.04 | 4.57 | 1.16 | 0.68 | 1 g/t cut | ||
AZ 085 dip-70 | 251.87 | 255.28 | 3.41 | 0.15 | 0.29 | |||
302.67 | 327.42 | 24.75 | 2.47 | 3.10 | Main Zone | |||
inc | 304.74 | 324.08 | 19.34 | 2.99 | 3.55 | 1 g/t cut | ||
477.62 | 487.76 | 10.14 | 0.97 | 0.21 | CIZ | |||
inc | 477.62 | 484.02 | 6.40 | 1.39 | 0.28 | 1 g/t cut | ||
512.03 | 518.62 | 6.59 | 0.66 | 0.15 | ||||
524.93 | 576.00 | 51.07 | 0.66 | 0.15 | ||||
inc | 526.85 | 532.79 | 5.94 | 2.07 | 0.50 | 1 g/t cut | ||
inc | 543.31 | 547.82 | 4.51 | 1.13 | 0.23 | 1 g/t cut | ||
581.56 | 595.27 | 13.71 | 0.54 | 0.15 | ||||
599.23 | 640.99 | 41.76 | 0.62 | 0.42 | ||||
inc | 602.89 | 615.09 | 12.20 | 1.15 | 0.06 | 1 g/t cut | ||
RC Hole, Central Main Zone |
ML20-163 | 100.58 | 103.63 | 3.05 | 0.89 | n/a | Upper Oxide Zone |
|
AZ 085 dip-75 | 115.82 | 188.98 | 73.16 | 1.92 | n/a | Main Zone | ||
inc | 117.35 | 143.26 | 25.91 | 2.81 | n/a | 1 g/t cut | ||
inc | 156.97 | 182.88 | 25.91 | 2.24 | n/a | 1 g/t cut | ||
219.46 | 224.03 | 4.57 | 0.32 | n/a | CIZ 0.1 g/t cut |
|||
243.84 | 272.80 | 28.96 | 1.67 | n/a | CIZ 0.1 g/t cut |
|||
inc | 249.94 | 265.18 | 15.24 | 2.94 | n/a | 1 g/t cut | ||
280.42 | 286.51 | 6.09 | 0.93 | n/a | CIZ 0.1 g/t cut |
|||
306.32 | 312.42 | 6.10 | 0.13 | n/a | CIZ 0.1 g/t cut |
Hole Location | Hole ID | From (m) | To (m) | Interval (m) | Gold (g/t) | Silver (g/t) | Comments | |
Released October 29, 2020 * Reported |
Diamond Core- tail Hole, Central Main Zone through the Central Intrusive Zone (CIZ) |
ML20-153CT | 159.74 | 172.52 | 12.78 | 0.56 | 0.79 | Upper Ox Zone 0.1 g/t cut |
AZ 085 dip-70 | 176.81 | 201.78 | 24.97 | 0.80 | 0.72 | Main Zone | ||
220.43 | 257.71 | 37.28 | 1.33 | 2.13 | Main Zone | |||
inc | 224.57 | 248.41 | 23.84 | 1.53 | 2.25 | 1 g/t cut | ||
369.17 | 381.68 | 12.51 | 0.45 | 0.96 | CIZ 0.1 g/t cut |
|||
415.14 | 418.19 | 3.05 | 2.23 | 1.54 | CIZ 0.1 g/t cut |
|||
426.55 | 430.07 | 3.52 | 0.64 | 0.69 | CIZ 0.1 g/t cut |
|||
482.19 | 486.77 | 4.58 | 0.52 | 0.22 | CIZ 0.1 g/t cut |
|||
535.23 | 543.15 | 7.92 | 0.39 | 0.18 | CIZ 0.1 g/t cut |
|||
555.80 | 584.46 | 28.66 | 1.37 | 0.88 | CIZ 0.1 g/t cut |
|||
inc | 566.26 | 575.46 | 9.20 | 3.43 | 2.20 | 1g/t cut | ||
Diamond Core- tail Hole, Central Main Zone through the Central Intrusive Zone (CIZ) |
ML20-155CT | 206.65 | 275.23 | 68.58 | 0.35 | 0.36 | Upper Oxide Zone | |
AZ 085 dip-70 | 285.90 | 290.47 | 4.57 | 0.31 | 0.54 | Upper Oxide Zone | ||
303.00 | 317.91 | 14.91 | 3.45 | 3.72 | Main Zone | |||
inc | 303.00 | 314.86 | 11.86 | 4.21 | 4.15 | 1 g/t cut | ||
322.33 | 326.36 | 4.03 | 1.11 | 3.49 | Main Zone | |||
339.24 | 341.80 | 2.56 | 0.18 | 0.27 | CIZ 0.1 g/t cut |
|||
345.34 | 357.44 | 12.10 | 0.24 | 1.21 | CIZ 0.1 g/t cut |
|||
362.62 | 371.55 | 8.93 | 0.46 | 0.91 | CIZ 0.1 g/t cut |
|||
464.21 | 477.93 | 13.72 | 0.79 | 0.18 | CIZ 0.1 g/t cut |
|||
484.02 | 501.67 | 17.65 | 0.86 | 0.12 | CIZ 0.1 g/t cut |
|||
inc | 484.02 | 490.12 | 6.10 | 1.63 | 0.13 | 1 g/t cut | ||
inc | 497.22 | 499.26 | 2.04 | 1.42 | 0.25 | 1 g/t cut | ||
514.59 | 525.29 | 10.70 | 0.41 | 0.07 | CIZ 0.1 g/t cut |
|||
535.50 | 538.89 | 3.39 | 1.90 | 0.30 | CIZ 0.1 g/t cut |
|||
544.00 | 578.21 | 34.21 | 1.66 | 1.50 | CIZ 0.1 g/t cut |
|||
inc | 544.00 | 557.58 | 13.58 | 2.73 | 1.95 | 1 g/t cut | ||
inc | 570.71 | 577.50 | 6.79 | 2.30 | 2.94 | 1 g/t cut | ||
592.23 | 617.98 | 25.75 | 0.62 | 0.80 | CIZ 0.1 g/t cut |
|||
inc | 604.42 | 613.74 | 9.32 | 1.38 | 0.59 | 1 g/t cut | ||
Diamond Core- tail Hole, Central Main Zone through the Central Intrusive Zone (CIZ) |
ML20-157CT | 463.48 | 510.64 | 47.16 | 1.42 | 0.98 | Main Zone | |
inc | 464.60 | 479.15 | 14.55 | 2.10 | 1.59 | 1 g/t cut | ||
AZ 080 dip-75 | 540.11 | 548.94 | 8.83 | 0.12 | 0.32 | CIZ 0.1 g/t cut |
||
615.79 | 619.81 | 4.02 | 0.88 | 0.59 | CIZ 0.1 g/t cut |
|||
631.02 | 649.53 | 18.51 | 0.17 | 0.11 | CIZ 0.1 g/t cut |
|||
660.59 | 675.74 | 15.15 | 0.56 | 0.32 | CIZ 0.1 g/t cut |
|||
RC Hole, Defining east boundary of ML |
ML20-164 | 224.03 | 227.08 | 3.05 | 1.92 | n/a | Main Zone | |
271.27 | 274.32 | 3.05 | 0.42 | n/a | Main Zone | |||
AZ 080 dip-72 | 307.85 | 320.04 | 12.19 | 0.23 | n/a | CIZ Top of zone - |
||
RC Hole, Lynnda Strip Target |
ML19-168 | 213.36 | 262.13 | 48.77 | 0.90 | n/a | Upper Zone 0.1 g/t cut |
|
inc | 228.60 | 245.36 | 16.76 | 1.86 | n/a | 1 g/t cut | ||
AZ 090 dip-60 | 294.13 | 400.81 | 106.68 | 0.71 | n/a | Lower Zone 0.1 g/t cut |
||
inc | 358.14 | 374.90 | 16.76 | 0.99 | n/a | 1 g/t cut | ||
imc | 384.05 | 399.29 | 15.24 | 1.31 | n/a | 1 g/t cut |
Hole Location | Hole ID | From (m) |
To (m) |
Interval (m) |
Gold (g/t) |
Silver (g/t) |
Comments | |
Released November 12, 2020 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals calculated using 0.1 g/t, 0.3 g/t, 1 g/t, 2 g/t & 20 g/t cutoff |
Diamond Core-tail Hole, West Target at ML |
ML20-135CT | 585.22 | 596.49 | 11.27 | 0.23 | 0.18 | Missed Target |
AZ 085 dip-80 | ||||||||
Diamond Core-tail Hole, North Zone through the (CIZ) |
ML20-158CT | 405.61 | 423.98 | 18.37 | 1.76 | 2.75 | Main Zone | |
inc | 407.72 | 423.98 | 16.26 | 1.86 | 2.18 | 1 g/t cut | ||
AZ 085 dip-70 | ||||||||
Diamond Core-tail Hole, North Zone through the (CIZ) |
ML20-159CT AZ 080 dip-65 |
289.56 | 297.79 | 8.23 | 1.13 | 0.47 | 1 g/t cut | |
326.87 | 410.80 | 83.93 | 2.70 | 6.82 | ||||
335.50 | 338.58 | 3.08 | 1.42 | 5.34 | 1 g/t cut | |||
inc | 342.35 | 401.72 | 59.37 | 3.52 | 8.84 | 1 g/t cut | ||
inc | 384.60 | 397.30 | 12.70 | 8.52 | 30.4 | 2 g/t cut | ||
inc | 395.35 | 397.31 | 1.96 | 31.34 | 61.49 | 20 g/t cut | ||
438.30 | 445.62 | 7.32 | 0.32 | 2.76 | CIZ 0.1 g/t cut |
|||
450.19 | 457.81 | 7.62 | 0.37 | 1.12 | CIZ 0.1 g/t cut |
Hole Location | Hole ID | From (m) |
To (m) |
Interval (m) |
Gold (g/t) |
Silver (g/t) |
Comments | |
Released November 17, 2020 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals calculated using 0.1 g/t, 0.3 g/t, 1 g/t, 2 g/t cutoff |
RC Hole, Lynnda Strip Target, Hole ended in mineralization within a vein |
ML20-166 | 167.64 | 175.26 | 7.62 | 0.46 | n/a | Upper Zone |
AZ 085 dip-70 | 211.84 | 272.80 | 60.96 | 0.50 | n/a | |||
inc | 222.50 | 225.55 | 3.05 | 1.10 | n/a | Upper Vein #1 1 g/t cut |
||
281.94 | 338.33 | 56.39 | 0.93 | n/a | ||||
inc | 292.61 | 313.94 | 21.33 | 1.26 | n/a | Upper Vein #2 1 g/t cut |
||
356.62 | 390.14 | 33.52 | 1.63 | n/a | Lower Zone | |||
inc | 359.66 | 371.86 | 12.20 | 2.98 | n/a | Lower Vein #1 1 g/t cut |
||
inc | 361.19 | 368.81 | 7.62 | 3.96 | n/a | 2g/t cut | ||
394.72 | 402.34 | 7.62 | 1.70 | n/a | Lower Vein #2 | |||
RC Hole, Lynnda Strip Target, Hole ended in mineralization |
ML20-170 | 249.94 | 292.61 | 42.67 | 2.06 | n/a | Upper Zone Vein #1 |
|
inc | 251.46 | 278.89 | 27.43 | 3.08 | n/a | 1 g/t cut | ||
inc | 263.65 | 275.84 | 12.19 | 4.88 | n/a | 2 g/t cut | ||
313.94 | 333.76 | 19.82 | 0.16 | n/a | ||||
338.33 | 353.57 | 15.24 | 0.24 | n/a | ||||
368.81 | 376.43 | 7.62 | 0.18 | n/a | ||||
399.29 | 448.06 | 48.77 | 0.39 | n/a | Lower Zone | |||
460.25 | 466.34 | 6.09 | 0.78 | n/a | ||||
AZ 085 dip-70 | 472.44 | 499.87 | 27.43 | 0.24 | n/a | Mid-Lower Zone | ||
RC Hole, Lynnda Strip Hole ended in mineralization |
CH20-15 | 376.43 | 428.24 | 51.81 | 0.70 | n/a | AZ 295 dip-62 | |
inc | 388.62 | 393.19 | 4.57 | 1.37 | n/a | Upper Vein #1 | ||
inc | 408.43 | 419.10 | 10.67 | 1.14 | n/a | Upper Vein #2 |
Hole Location | Hole ID | From (m) |
To (m) |
Interval (m) |
Gold (g/t) |
Silver (g/t) |
Comments | |
Released Jan 6, 2021 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t, 1 g/t & 2g/t cutoff |
Diamond Core Hole @ Mother Lode North Feeder CIZ |
ML20-165CT | 285.29 | 289.71 | 4.42 | 0.46 | 0.69 | Main Zone |
308.46 | 438.91 | 130.45 | 2.33 | 3.91 | Main - CIZ | |||
inc | 309.98 | 314.85 | 4.87 | 1.91 | 2.80 | 1 g/t cut | ||
inc | 317.60 | 424.28 | 106.68 | 2.59 | 4.34 | 1 g/t cut | ||
inc | 396.60 | 424.3 | 27.7 | 4.46 | 9.26 | 2 g/t cut | ||
AZ085 dip-75 | 446.84 | 452.79 | 5.95 | 0.54 | 10.85 | CIZ | ||
Hole Location | Hole ID | From (m) |
To (m) |
Interval (m) |
Gold (g/t) |
Silver (g/t) |
Comments | |
Released Jan 13, 2021 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.1 g/t, 1 g/t cutoff |
Diamond Core Hole @ Lynnda Strip, ~2km’s North of Mother Lode | ML20-167CT | 190.50 | 239.26 | 48.76 | 0.52 | n/a | Upper Zone |
inc | 201.59 | 205.25 | 3.66 | 1.97 | n/a | |||
258.82 | 369.87 | 111.05 | 0.80 | n/a | ||||
inc | 293.12 | 303.70 | 10.58 | 1.08 | n/a | Upper Vein | ||
inc | 343.15 | 369.26 | 26.11 | 1.27 | n/a | Upper Vein | ||
395.33 | 419.44 | 24.11 | 0.81 | n/a | Lower Zone | |||
inc | 402.95 | 407.52 | 4.57 | 1.24 | n/a | Lower Vein | ||
422.76 | 432.91 | 10.15 | 0.50 | n/a | ||||
445.92 | 450.41 | 4.49 | 0.63 | n/a | ||||
455.07 | 463.91 | 8.84 | 0.37 | n/a | ||||
471.53 | 485.24 | 13.71 | 0.44 | n/a | ||||
490.97 | 516.64 | 25.67 | 0.26 | n/a | ||||
571.88 | 575.16 | 3.28 | 0.26 | n/a | Hole ended in oxide gold (0.67 g/t) | |||
AZ 090 dip-60 | 580.64 | 585.06 | 4.42 | 0.37 | n/a | |||
Diamond Core Hole @ Lynnda Strip, ~2km’s North of Mother Lode |
ML20-169CT | 207.96 | 260.60 | 52.64 | 1.39 | n/a | Upper Zone | |
inc | 209.26 | 238.80 | 29.54 | 2.15 | n/a | Vein #1 | ||
309.98 | 325.22 | 15.24 | 0.32 | n/a | ||||
355.70 | 358.75 | 3.05 | 0.14 | n/a | ||||
391.03 | 471.10 | 80.07 | 0.83 | n/a | ||||
inc | 433.43 | 461.62 | 28.19 | 1.47 | n/a | Lower Vein | ||
490.69 | 524.87 | 34.18 | 0.36 | n/a | ||||
534.36 | 537.87 | 3.51 | 0.27 | n/a | ||||
541.63 | 561.81 | 20.18 | 0.25 | n/a | ||||
580.67 | 585.64 | 4.97 | 0.23 | n/a | ||||
AZ 090 dip-60 | 672.10 | 682.81 | 10.71 | 0.12 | n/a | |||
RC Hole @ South Merlin, ~300m west of LS | ML20-172 | 99.06 | 112.78 | 13.72 | 0.13 | n/a | Upper Zone | |
124.97 | 137.16 | 12.19 | 0.14 | n/a | ||||
160.02 | 188.98 | 28.96 | 0.20 | n/a | ||||
AZ 085 dip-60 | 233.17 | 245.36 | 12.19 | 0.61 | n/a | Lower Zone |
Hole Location | Hole ID | From (m) |
To (m) |
Interval (m) |
Gold (g/t) |
Silver (g/t) |
Comments | |
Released Feb 8, 2021 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.3 g/t, 1 g/t & 2g/t cutoff |
Diamond Core Tail Hole @ Mother Lode North Feeder CIZ |
ML20-160CT | 304.04 | 307.53 | 3.49 | 0.70 | 0.53 | |
AZ 085 dip-75 | 314.40 | 344.56 | 30.16 | 1.42 | 1.72 | Main Zone | ||
inc | 315.65 | 343.46 | 27.81 | 1.48 | 1.66 | 1 g/t cut | ||
360.27 | 366.13 | 5.86 | 0.74 | 0.79 | ||||
381.49 | 387.71 | 6.22 | 0.19 | 0.55 | CIZ | |||
396.85 | 483.72 | 86.87 | 1.65 | 0.93 | CIZ | |||
inc | 416.66 | 473.05 | 56.39 | 2.34 | 1.18 | 1 g/t cut | ||
inc | 427.00 | 447.20 | 20.20 | 3.11 | 2.05 | 2 g/t cut | ||
487.22 | 505.05 | 17.83 | 0.47 | 0.72 | ||||
Diamond Core Tail Hole @ Mother Lode North Feeder CIZ |
ML20-176CT | 262.74 | 266.75 | 4.01 | 0.85 | n/a | ||
AZ 085 dip-75 | 287.43 | 398.22 | 110.79 | 1.68 | n/a | Main - CIZ | ||
inc | 306.54 | 317.60 | 11.06 | 1.88 | n/a | 1 g/t cut | ||
inc | 323.79 | 382.52 | 58.73 | 2.47 | n/a | 1 g/t cut | ||
434.74 | 447.75 | 13.01 | 0.29 | n/a | CIZ | |||
Diamond Core Tail Hole | ML20-179CT | 385.88 | 388.39 | 2.51 | 0.35 | 0.21 | Main Zone | |
AZ 085 dip-75 | 436.16 | 468.30 | 32.14 | 1.42 | 6.58 | Lost hole in fault zone |
Hole Location | Hole ID | From (m) |
To (m) |
Interval (m) |
Gold (g/t) |
Silver (g/t) |
Comments | |
Released Feb 11, 2021 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.1 g/t, 1 g/t, 2 g/t cutoff |
Diamond Core Tail Hole Lynnda Strip | ML20-171CT | 256.40 | 460.86 | 204.46 | 1.36 | n/a | Upper Zone |
inc | 257.40 | 294.74 | 37.34 | 5.39 | n/a | Upper Vein 1 g/t cut |
||
inc | 278.00 | 288.5 | 10.50 | 9.99 | n/a | 2 g/t cut | ||
AZ 090 dip-65 | 465.43 | 471.53 | 6.10 | 0.15 | n/a | |||
491.34 | 496.50 | 5.16 | 0.18 | n/a | Lower Zone | |||
507.64 | 509.89 | 2.25 | 0.70 | n/a | ||||
529.44 | 537.06 | 7.62 | 0.20 | n/a | ||||
552.30 | 572.11 | 19.81 | 0.23 | n/a | ||||
576.68 | 579.73 | 3.05 | 0.18 | n/a | ||||
RC Hole at Lynnda Strip | ML20-181 | 179.83 | 185.93 | 6.10 | 0.12 | n/a | Upper Zone | |
AZ 085 dip-60 | 198.12 | 307.85 | 109.73 | 0.47 | n/a | |||
inc | 277.37 | 284.99 | 7.62 | 1.52 | n/a | Upper Vein | ||
313.94 | 367.28 | 53.34 | 0.58 | n/a | Lower Zone | |||
inc | 329.18 | 333.76 | 4.58 | 1.25 | n/a | Lower Vein 1 | ||
inc | 342.90 | 347.47 | 4.57 | 2.29 | n/a | Lower Vein 2 | ||
384.05 | 413.00 | 28.95 | 0.74 | n/a | ||||
inc | 391.67 | 394.72 | 3.05 | 3.20 | n/a | Lower Vein 3 | ||
423.67 | 463.30 | 39.63 | 0.48 | n/a | (hole ended in oxide) | |||
478.54 | 481.58 | 3.04 | 0.23 | n/a | ||||
RC Hole at Lynnda Strip | ML20-182 | 297.18 | 365.76 | 68.58 | 1.23 | n/a | Upper Zone | |
inc | 297.18 | 335.28 | 38.10 | 1.97 | n/a | Upper Vein 1 g/t cut |
||
AZ 080 dip-60 | 379.48 | 417.58 | 38.10 | 0.25 | n/a | |||
423.67 | 426.72 | 3.05 | 0.19 | n/a | Lower Zone | |||
435.86 | 487.68 | 51.82 | 0.60 | n/a | ||||
inc | 467.87 | 472.44 | 4.57 | 1.22 | n/a | Lower Vein 1 g/t cut |
||
RC Hole at Lynnda Strip | ML20-184 AZ 080 dip-60 |
240.79 | 245.36 | 4.57 | 0.49 | n/a | Upper Zone | |
329.18 | 438.91 | 109.73 | 0.53 | n/a | ||||
inc | 329.18 | 342.90 | 13.72 | 1.58 | n/a | Upper Vein 1 g/t cut |
||
(hole ended in oxide gold in Upper Zone) | ||||||||
RC Hole at South Merlin | ML20-180 | 161.54 | 245.36 | 83.82 | 0.58 | n/a | Upper Zone | |
inc | 220.98 | 237.74 | 16.76 | 1.53 | n/a | Upper Vein 1 g/t cut |
||
AZ 085 dip-60 |
Hole Location | Hole ID | From (m) |
To (m) |
Interval (m) |
Gold (g/t) |
Silver (g/t) |
Comments | |
Released Mar 25, 2021 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.1 g/t, 1 g/t cutoff |
Diamond Core Tail Hole @ Mother Lode Central Feeder CIZ |
ML20-161CT | 218.54 | 222.56 | 4.02 | 0.15 | 0.60 | Upper Oxide Zone |
AZ 085 dip-65 | 241.40 | 252.37 | 10.97 | 1.15 | 1.14 | Main Zone | ||
inc | 242.93 | 247.50 | 4.57 | 1.84 | 1.19 | 1 g/t cut | ||
265.79 | 338.94 | 73.15 | 1.58 | 2.07 | CIZ | |||
inc | 266.40 | 307.14 | 40.74 | 2.40 | 2.41 | 1 g/t cut | ||
inc | 278.27 | 285.60 | 7.33 | 4.20 | 1.75 | 3 g/t cut | ||
inc | 332.84 | 338.94 | 6.10 | 1.29 | 3.47 | 1 g/t cut | ||
Hole lost in top of CIZ | ||||||||
Diamond Core Tail Hole @ Mother Lode Central Feeder CIZ |
ML20-162CT | 140.82 | 186.68 | 45.86 | 0.69 | 0.57 | Upper Oxide Zone | |
AZ 083 dip-77 | 245.28 | 283.57 | 38.29 | 2.15 | 2.11 | Main Zone | ||
378.58 | 390.91 | 12.33 | 0.24 | 0.12 | CIZ | |||
400.65 | 435.34 | 34.69 | 4.24 | 3.90 | ||||
439.14 | 474.99 | 35.85 | 1.77 | 3.29 | ||||
inc | 439.14 | 454.25 | 15.11 | 3.83 | 6.96 | 1 g/t cut | ||
481.83 | 506.58 | 24.75 | 2.47 | 8.89 | ||||
inc | 482.80 | 492.99 | 10.19 | 5.74 | 21.10 | 1 g/t cut | ||
514.65 | 520.29 | 5.64 | 0.20 | 0.07 | ||||
531.88 | 536.45 | 4.57 | 0.13 | 0.25 | ||||
556.87 | 597.32 | 40.45 | 1.45 | 1.92 | ||||
inc | 567.04 | 580.64 | 13.60 | 3.74 | 4.35 | 1 g/t cut | ||
609.60 | 616.00 | 6.40 | 0.25 | 1.45 |
Hole Location | Hole ID | From (m) |
To (m) |
Interval (m) |
Gold (g/t) |
Silver (g/t) |
Comments | |
Released Apr 8, 2021 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.1 g/t, 1 g/t cutoff in Vein |
RC Hole at Lynnda Strip | ML20-186 | 257.56 | 365.76 | 108.20 | 1.13 | n/a | Upper Zone |
inc | 257.56 | 294.13 | 36.57 | 2.75 | n/a | Upper Vein | ||
AZ 078 dip-60 | 425.20 | 487.68 | 62.48 | 0.42 | n/a | Lower Zone | ||
RC Hole at Lynnda Strip | ML20-188 | 160.02 | 167.64 | 7.62 | 0.12 | n/a | Upper Zone | |
188.98 | 193.55 | 4.57 | 0.23 | n/a | ||||
210.31 | 324.61 | 114.30 | 0.96 | n/a | ||||
inc | 246.89 | 310.90 | 64.01 | 1.19 | n/a | Upper Vein | ||
329.18 | 394.72 | 65.54 | 0.41 | n/a | ||||
399.29 | 460.25 | 60.96 | 0.33 | n/a | Lower Zone | |||
AZ 090 dip-60 | 467.87 | 470.92 | 3.05 | 0.39 | n/a | |||
RC Hole at Lynnda Strip | ML20-189 | 178.31 | 356.62 | 178.31 | 0.66 | n/a | Upper Zone | |
inc | 202.69 | 213.36 | 10.67 | 2.85 | n/a | Upper Vein | ||
AZ 090 dip-60 | 362.71 | 463.30 | 100.59 | 0.94 | n/a | Lower Zone | ||
inc | 339.85 | 349.00 | 9.15 | 1.04 | n/a | Lower Vein | ||
inc | 382.52 | 391.67 | 9.15 | 1.44 | n/a | Lower Vein | ||
inc | 396.24 | 440.44 | 44.20 | 1.41 | n/a | Lower Vein | ||
RC Hole at South Merlin | ML20-190 | 140.21 | 153.92 | 13.71 | 0.17 | n/a | Upper Zone | |
AZ 090 dip-60 | 160.02 | 219.46 | 59.44 | 0.33 | n/a | Lost hole in Upper Zone |
Hole Location | Hole ID | From (m) |
To (m) |
Interval (m) |
Gold (g/t) |
Silver (g/t) |
Comments | |
Released May 18, 2021 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals are calculated using a 0.1 g/t, 1 g/t cutoff in Vein |
Diamond Core Tail Hole @ Mother Lode | ML20-174CT | 471.81 | 498.50 | 26.69 | 2.57 | 6.08 | Main Zone |
inc | 487.96 | 495.30 | 7.34 | 4.70 | 9.87 | 1 g/t cut | ||
519.38 | 539.50 | 20.12 | 1.11 | 3.65 | CIZ | |||
AZ 085 dip-73 | 543.15 | 546.90 | 3.75 | 0.36 | 4.68 | CIZ | ||
Diamond Core Tail Hole @ Mother Lode | ML20-175CT | 442.57 | 457.05 | 14.48 | 6.48 | 25.91 | Main Zone | |
AZ 087 dip-67 | 473.05 | 485.24 | 12.19 | 0.13 | 0.36 | CIZ | ||
500.48 | 503.53 | 3.05 | 0.12 | 0.33 | CIZ | |||
512.67 | 516.51 | 3.84 | 0.11 | 0.77 | CIZ | |||
543.15 | 559.92 | 16.77 | 0.13 | 0.46 | CIZ | |||
Diamond Core Tail Hole @ Lynnda Strip | ML20-183CT | 296.05 | 476.10 | 180.05 | 0.79 | n/a | Upper Zone | |
inc | 296.88 | 318.42 | 21.54 | 3.32 | n/a | Upper Vein 1 g/t cut |
||
inc | 451.71 | 468.75 | 17.04 | 1.10 | n/a | Lower Vein 1 g/t cut |
||
AZ 090 dip-63 | 480.80 | 494.69 | 13.89 | 0.17 | n/a | Lower Zone | ||
500.18 | 503.32 | 3.14 | 0.17 | n/a | ||||
511.15 | 521.82 | 10.67 | 0.14 | n/a | ||||
526.03 | 543.15 | 17.12 | 0.29 | n/a | ||||
552.30 | 573.17 | 20.87 | 0.44 | n/a | ||||
576.93 | 594.97 | 18.04 | 0.12 | n/a | ||||
603.12 | 613.26 | 10.14 | 0.14 | n/a | ||||
Diamond Core Tail Hole @ Lynnda Strip | ML20-185CT | 323.36 | 508.77 | 185.41 | 0.82 | n/a | Upper Zone | |
inc | 325.22 | 339.82 | 14.60 | 3.40 | n/a | Upper Vein 1 g/t cut |
||
inc | 483.41 | 489.81 | 6.40 | 1.41 | n/a | Upper Vein 1 g/t cut |
||
AZ 090 dip-60 | 515.51 | 526.58 | 11.07 | 0.26 | n/a | Lower Zone | ||
531.30 | 536.77 | 5.47 | 0.58 | n/a | ||||
563.68 | 588.87 | 25.19 | 0.21 | n/a | ||||
611.73 | 616.20 | 4.47 | 0.16 | n/a |
Lynnda Strip and Mother Lode Drill Plan Map as of May 18, 2021
Hole Location | Hole ID | From (m) |
To (m) |
Interval (m) |
Gold (g/t) |
Silver (g/t) |
Comments | |
Released June 24, 2021 * Reported intercepts are not true widths as there is currently insufficient data to calculate true orientation in space. Mineralized intervals calculated using a 0.3 g/t & 1 g/t cut-off |
Diamond Core Tail Hole @ Mother Lode | ML20-173CT | 319.13 | 328.86 | 9.73 | 1.43 | 0.34 | Main Zone |
AZ 085 dip-68 | 351.90 | 374.72 | 22.82 | 1.09 | 2.09 | Main Zone | ||
inc | 351.90 | 361.47 | 9.57 | 2.05 | 2.80 | 1 g/t cut | ||
412.09 | 430.92 | 18.83 | 0.55 | 3.41 | CIZ | |||
Diamond Core Tail Hole @ Mother Lode | ML20-193CT | 315.65 | 433.93 | 118.28 | 1.84 | 3.14 | Main Zone | |
inc | 332.84 | 343.51 | 10.67 | 3.18 | 2.51 | 1/ g/t cut | ||
inc | 348.08 | 430.10 | 82.02 | 2.01 | 2.55 | 1 g/t cut | ||
AZ 087 dip-67 | Lost hole top of CIZ |